New to bm3 need help

[Shadows_mkv]

I just got my dme back from femto and installed the BM3 flex fuel kit while the dme was out. Im curious on how I check ethanol content?

Sponsored

 

[OldHead-MKV-Owner]

Have you installed your DME yet?

 

[SgtCki]

one click down on the left cruise control toggle.. hold it at the first position. RPM will move to the percentage.. I.E. 4000 = 40%, 5500 = 55% etc.

 

[OldHead-MKV-Owner]

Or you can just read from the bm3 app

 

[mkvB58KING]

one click down on the left cruise control toggle.. hold it at the first position. RPM will move to the percentage.. I.E. 4000 = 40%, 5500 = 55% etc.

What happens when you run E content that exceeds our tach? like E85 or E90 for example

 

[razorlab]

What happens when you run E content that exceeds our tach? like E85 or E90 for example

Read it in the app.

 

[mkvB58KING]

Read it in the app.

Dang. Hopefully they hijack the HP/TQ gauges like ecutek does. That's the best place for it IMO.

 

[SgtCki]

What happens when you run E content that exceeds our tach? like E85 or E90 for example

You can read it in the App... But at those percentages, the vast majority are running a tune calibrated directly to their targeted ethanol blend. I havent gone above E50 and the OTS multimap is at blend factor .85... Draggy is low 11s 1/4 with +2 60ft

Sponsored