Sponsored

Show me your Garmin Catalyst/Lap Timer setup

johnsmither

Well-Known Member
Joined
Sep 23, 2025
Threads
6
Messages
70
Reaction score
38
Location
Canada
Car(s)
A90
Any in-cabin pictures of your Garmin catalyst/lap timer setup? Curious if you guys use any special mounts. Catalyst is pretty big and our windshield's already narrow so want to see if anyone has it out of the way. I have mine setup in the top right corner.
Sponsored

 

Traxion

Well-Known Member
Joined
Oct 6, 2021
Threads
9
Messages
505
Reaction score
824
Location
Southeast, USA
Car(s)
2022 Toyota Supra 3.0 Premium
Screenshot from one of my vids. I use an Anima mount that has a standard 1" ball that fits the catalyst arms. Only recommendation is to add some 3M foam tape on the bottom during install as it'll help with dampening vibrations and also make the connection from the bottom of the head unit and the mount more secure.

https://animamotorsports.com/toyota-supra-a90.html

Catalyst Location.webp


3D printed clip that attaches to the Catalyst base also helps keep it secure. I didn't have to get longer screws, the original ones were fine. https://www.thingiverse.com/thing:4746675
 

razorlab

Well-Known Member
First Name
Bryan
Joined
Oct 2, 2021
Threads
29
Messages
8,834
Reaction score
17,331
Location
NY
Car(s)
Not a Corvette.
Proclip with RAM mount on my Supra, Suction mount with RAM mount on my 240. No issues.



 
OP
OP

johnsmither

Well-Known Member
Joined
Sep 23, 2025
Threads
6
Messages
70
Reaction score
38
Location
Canada
Car(s)
A90
Screenshot from one of my vids. I use an Anima mount that has a standard 1" ball that fits the catalyst arms. Only recommendation is to add some 3M foam tape on the bottom during install as it'll help with dampening vibrations and also make the connection from the bottom of the head unit and the mount more secure.

https://animamotorsports.com/toyota-supra-a90.html

Catalyst Location.webp


3D printed clip that attaches to the Catalyst base also helps keep it secure. I didn't have to get longer screws, the original ones were fine. https://www.thingiverse.com/thing:4746675
Do you have any videos of it during a session? Want to see how sturdy it is. Looks pretty nice.

Proclip with RAM mount on my Supra, Suction mount with RAM mount on my 240. No issues.



Hey to doublecheck, is this with Proclip Part #855595 and #216197? Thanks
 

coryyL

Member
First Name
Cory
Joined
Oct 3, 2026
Threads
1
Messages
21
Reaction score
2
Location
USA
Car(s)
SupraMK5, Bronco
Screenshot from one of my vids. I use an Anima mount that has a standard 1" ball that fits the catalyst arms. Only recommendation is to add some 3M foam tape on the bottom during install as it'll help with dampening vibrations and also make the connection from the bottom of the head unit and the mount more secure.

https://animamotorsports.com/toyota-supra-a90.html

Catalyst Location.webp


3D printed clip that attaches to the Catalyst base also helps keep it secure. I didn't have to get longer screws, the original ones were fine. https://www.thingiverse.com/thing:4746675
I just found this product yesterday. Definitely a more redefined solution.
 

Traxion

Well-Known Member
Joined
Oct 6, 2021
Threads
9
Messages
505
Reaction score
824
Location
Southeast, USA
Car(s)
2022 Toyota Supra 3.0 Premium
Do you have any videos of it during a session? Want to see how sturdy it is. Looks pretty nice.
Proclip can damage the dash around the vent because it's a pressure clip between the dash and the plastic edge.


 
Last edited:

i3igpete

Well-Known Member
Joined
May 16, 2022
Threads
49
Messages
1,349
Reaction score
1,649
Location
Chicago
Car(s)
2023 3.0L 8AT
I also have the anima mount, I was one of the early batches where they forgot to apply Loctite so the ball worked itself loose after some time. Otherwise, the sheet metal itself is a little bit on the flimsy side, so the Garmin will need to be at or near the 6 o'clock position to not put too much strain on it.
 

razorlab

Well-Known Member
First Name
Bryan
Joined
Oct 2, 2021
Threads
29
Messages
8,834
Reaction score
17,331
Location
NY
Car(s)
Not a Corvette.
Do you have any videos of it during a session? Want to see how sturdy it is. Looks pretty nice.


Hey to doublecheck, is this with Proclip Part #855595 and #216197? Thanks
Just 855595. I have a RAM ball plate screwed into it.
Sponsored

 
 








Top