Strange braking behavior in high speed curves

[Thatpartsguy]

What tire pressures do you have it set at.

37-38psi

Sponsored

 

[razorlab]

37-38psi

Cold or warm?

 

[Thatpartsguy]

Cold or warm?

Cold

 

[razorlab]

Cold

I would suggest trying lower cold. 38 cold will easily be 42+ when warm.

Try 33-34 cold

 

[Thatpartsguy]

I would suggest trying lower cold. 38 cold will easily be 42+ when warm.

Try 33-34 cold

I'll give it a shot thank you!

 

[MoreIceTea]

Rear can get toe out when lifted if static toe is under 0.07 deg toe in per side. With the soft factory bushings, i wouldn’t recommend anything below 0.1 degree. Starting at around 0.15 is a better idea. A tone of ppl are running 0.2 to get max rear stability. Toyota is making some really bad recommendations on the spec sheet. Factory alignment for rear toe is usually under 0.7 which doesn’t make any sense for any performance driving.

side note: never a good idea to brake in high speed curves. Even lifting the throttle would unsettle the car.

Sponsored