Supra Coding Step By Step

[shownfu]

Is anyone using any OBD reader other than the MX/MX+?

Sponsored

 

[Evoh]

Is anyone using any OBD reader other than the MX/MX+?

I'm using this: https://www.amazon.com/gp/product/B08694LQR1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

It only works with android and it's a little slow but it works just fine.

 

[genoxy]

When you choose the vehicle, you need to pick Z4. You will see more options.

Legend thank you

 

[genoxy]

Is there a way to code in the following

Change tire pressure from BAR to PSI or KPI

Increase the size of the rear view camera display

 

[akasonny]

Agreed, That's why I picked these up. They work great.

https://www.amazon.com/gp/product/B00MECEI14/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07NW9HSL7/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

How are you using this cable? Without software?

 

[kalsonc]

thanks for the help here

coded:
ASD - off
mirror tilt - 40%
warning notification on startup - off
HUD brightness


but is anyone able to code the stereo to turn off when you open the door after car is off?

 

[Blue]

Did anyone already managed to code out the stnd seats when installing bucket seats?

so the errors of the safety systems go out?

and which codes did you change?
Using ESTA?

 

[30MilesOffshore]

but is anyone able to code the stereo to turn off when you open the door after car is off?

You shouldn't have to code for that. It is already a feature in the settings.

>>> Vehicle Settings >>> Doors/Keys >>> Turn Off After Door Opening

 

[genoxy]

You shouldn't have to code for that. It is already a feature in the settings.

>>> Vehicle Settings >>> Doors/Keys >>> Turn Off After Door Opening

I think he may mean after the car is turned off, you exit the vehicle and need to open it again then everything including the stereo comes back on. To turn off again need to close the door and lock.

 

[Cruzinbill]

How are you using this cable? Without software?

I used it with the Bimmercode app.

 

[APanoMKV]

I think he may mean after the car is turned off, you exit the vehicle and need to open it again then everything including the stereo comes back on. To turn off again need to close the door and lock.

I know what he means, some of the other bmws have a coding option to essentially turn off all of the electronics once the door opens. That would be nice to have tbh, I don’t really like that it all stays on for another 10/15 min after I lock the car.

 

[Kato]

I know what he means, some of the other bmws have a coding option to essentially turn off all of the electronics once the door opens. That would be nice to have tbh, I don’t really like that it all stays on for another 10/15 min after I lock the car.

FYI - reprogram the car draws a lot of juice from the battery. If you're not driving it a lot, I strongly suggest a charger when not driven or during reprogram. Look for battery charger thread in this forum to find out what's recommended.

 

[wolf_kyle]

Anyone else using another OBD reader? other than the obdlink MX+, that also works with ios?

 

[Paolo]

Is there a way to code in the following

Change tire pressure from BAR to PSI or KPI

Increase the size of the rear view camera display

From memory you can set the units to what you like and that should help.

Via Toyota Supra Command: 1 "My Vehicle" 2 "System settings" 3 "Units" 4 Select the desired menu item. 5 Select the desired setting

Good luck.
Paolo

 

[akasonny]

I used it with the Bimmercode app.

I'm confused. The Bimmercode app has support for hardwire OBD connection? Mine is bluetooth. I really would like to use a PC with bimmercode but I'm finding zip.

Sponsored