Supra Development Thread - OEM+ Designs

[stormgreysupra]

Any timetable??

first we will finish our bodykit, exhaust hole covers, canards, GR 86 Badges, GR86 wheel caps, and GR Yaris Wheel Caps.

then we will get started on the steering wheel badges.

Sponsored

 

[MoTeC_R]

first we will finish our bodykit, exhaust hole covers, canards, GR 86 Badges, GR86 wheel caps, and GR Yaris Wheel Caps.

then we will get started on the steering wheel badges.

Do you expect the Supra steering wheel badges to be overlaid or direct replacement installs? it would be nice for most to be able to overlay, but not at the expense of asthmatics I suppose.

 

[stormgreysupra]

Do you expect the Supra steering wheel badges to be overlaid or direct replacement installs? it would be nice for most to be able to overlay, but not at the expense of asthmatics I suppose.

we were debating this too but an overlay would not look good at all. It would be too bulky.

the replacement would however require removing the airbag to then remove the oem toyota logo. This is why we haven’t started development yet.

 

[stormgreysupra]

I asked the same guesstimate and late this year hopefully. Can’t wait for these since no one else has take the task on.

also we are considering making an oem style side vent replacement too. That would come before the full door garnish.

 

[MoTeC_R]

also we are considering making an oem style side vent replacement too. That would come before the full door garnish.

Yes that’s what I’m wanting. I don’t want to replace the panel of garnish just the faux vent / trim. Would be nice to see your traditional OEM+ style and a carbon replacement (even if faux/abs carbon look (if it looks high quality), as you would monopolize the market on them. ? I’d prefer real carbon but ABS styled in the name of carbon if better than nothing as a second option?

 

[stormgreysupra]

Yes that’s what I’m wanting. I don’t want to replace the panel of garnish just the faux vent / trim. Would be nice to see your traditional OEM+ style and a carbon replacement (even if faux/abs carbon look (if it looks high quality), as you would monopolize the market on them. ? I’d prefer real carbon but ABS styled in the name of carbon if better than nothing as a second option?

We only work with PP which is the highest quality plastic, it’s the same material that Toyota used for the exterior trim and vents.

Carbon isn’t our thing because fitment us never perfect with it and it’s not possible to make oem style clips with carbon.

 

[stormgreysupra]

We are expecting to have the mold for our exhaust hole cutout covers done in about 2 weeks. Hopefully we can start accepting orders next month.

 

[AayVeee]

hey @stormgreysupra is this body kit supposed to be a TRD replica? i've been looking for a a91-cf replica for a long time but nothing out there for something like that

 

[stormgreysupra]

hey @stormgreysupra is this body kit supposed to be a TRD replica? i've been looking for a a91-cf replica for a long time but nothing out there for something like that

No it’s not a replica, it’s our own design.

 

[stormgreysupra]

First test production of our upcoming exhaust hole cutout covers.

 

[VeroBlue]

@stormgreysupra I have an idea for a product that I couldn’t source for those of us with manuals…..

how about paddle shift delete covers for steering wheels? I want an inexpensive aftermarket flat bottom wheel for my Supra and they make plenty of options for the a90 but all manual sourced ones are expensive. Plastic delete covers for the paddle shifters would allow us to purchase the inexpensive steering wheel options and place the covers over the holes where the paddles were

 

[zrk]

I have an idea for a product that I couldn’t source for those of us with manuals…..

how about paddle shift delete covers for steering wheels? I want an inexpensive aftermarket flat bottom wheel for my Supra and they make plenty of options for the a90 but all manual sourced ones are expensive. Plastic delete covers for the paddle shifters would allow us to purchase the inexpensive steering wheel options and place the covers over the holes where the paddles were

You could probably 3d print something pretty cheap.

 

[stormgreysupra]

A new product we have planned are these added diffuser fins. They go on the factory diffuser.

 

[stormgreysupra]

The mold turned out great! We should be starting production very shortly.

Note that in the photo these are still raw plastic from injection, after painting they will look even better!

 

[Kolme]

Ahhhh I need the hood vent!!!

Sponsored