Suvneer Streethunter style wing - pre drill hole locations

[Han_Supra]

FYI the non-cf version of the Streethunter style replica "sh style" on their website does not come with pre drilled holes for connecting the blade.
3 holes pre-drilled on the bottom of each stand
2 holes pre drilled on each side of the blade (which is CF)
But not the two holes to bolt the blade and the stands together unfortunately. it does come with a piece of tape placed with white dots to indicate where it should be drilled, but I definitely don't trust those.

The outside of the stands where the end caps are does have a hollow cut for the outside, but the inner wall still has to be drilled.
On the full CF version from thicc whips YouTube video, all holes are pre-drilled including the cf stands for mounting the blade.

Secondly I've found the item is no longer listed on suvneers website at the moment

Edited to add second photo

Sponsored

 

[Erty]

Did you end up "winging it" with the pre-drilled hole locations on the inside? How'd the install go, any new pics?

 

[Vegas17]

That's not how mine came in.... Just drill out accordingly and make sure to use the largest washer you can fit in there to help support the blade to upright. Not great craftsmanship on the Suvneer one I got as well. I did a lot of body filler work on pinholes and smooth out areas before paint. I also filled the holes on the cover plates and just used automotive 3m tape for a cleaner look.

If I recall the hardware was missing the size noted in the manual was incorrect to double check your blades hardware insert sizing.

 

[Han_Supra]

Once I'm at home I can give the full hardware list I used. In the meantime, here's updated photos.
@Erty in the end I actually preferred that those holes were not drilled. Because this meant that I could choose my own angle of attack for the blade portion of the wing. Some people choose a more aggressive angled style, I chose to have it more flat.
(Edited a typo)

 

[Han_Supra]

6x M6 bolts @35mm length
6x M6 washers @ 16mm outer diam

4x M5 bolts @40mm length
4x M5 washers @12mm outer diam

All in stainless steel. The washers you could go a bit larger in outer diam like Vegas17 is suggesting.

I also had the shop removed the screw holes and used a combination of 3M to attach, and silicone to water proof

 

[Vegas17]

Definitely spend the time to fill the holes on the cover plate. Looks much cleaner and the 3m tape is plenty strong to keep it in place. Fortunately the carbon blade is really well made imo.

 

[crusader]

Looking to buy a suvneer wing also, just wanted to know I hear people say some wobble at high speeds; wanted to know do you have this issue?

 

[Vegas17]

Mine moves a tiny bit but I spent time adding larger washers at mounting points. I've done a track event hitting 100+ mph and its fine.

 

[Han_Supra]

I don't speed in my supra. Grandma driver here to keep my baby safe (also CO drivers are insanely bad). At highway speeds I don't notice any wobbling. I will mention that suvneer no longer lists the Streethunter replica wing in their website. So your next bet is the JPM eBay version

 

[Ryan6957]

6x M6 bolts @35mm length
6x M6 washers @ 16mm outer diam

4x M5 bolts @40mm length
4x M5 washers @12mm outer diam

All in stainless steel. The washers you could go a bit larger in outer diam like Vegas17 is suggesting.

I also had the shop removed the screw holes and used a combination of 3M to attach, and silicone to water proof

Wait dumb question, but they took off the wing and then used 3m tape to full the holes and then screwed the wing back onto the car?

 

[Erty]

Wait dumb question, but they took off the wing and then used 3m tape to full the holes and then screwed the wing back onto the car?

He's talking about the end plates on the winglets. They come with holes to cover the mounting points. There are no longer holes in them because he filled those and stuck it on with 3M.

 

[Han_Supra]

Yup, Erty is correct. I don't know what material they used to fill it. but the 3M tape was for sticking it on there since it no longer screws back on.

Sponsored