What did you do to your Supra today?

[Danimal]

Any tips? Go smoothly?

The MHD Unlocker thread was helpful for that part. Flashing maps was easy and learning the steering wheel controls was also no problem using the MHD website and PDF manual in the app. Couldn’t drive the car today due to rain

 

[Kiske]

Cusco Trunk Brace/Harness Bar was painted gunmetal/silver last week and installed today. Picked a shade somewhere between my OEM turbulence and the replaced aluminum bar's finish as the blue wasn't doing it for me.

 

[Kiske]

@Souprahman
@GRSupraguy
@DarkZupra

How Are you guy's sideskirts fitting? I've noticed my tape has left it's original position and the skirt now refuses to fully cover the black OEM skirt (even with some pressure put on it) below the front of the doors.

 

[TSmkV]

I installed the heritage tail lights, rexspeed 3rd brake light, tri function side markers. I didn't connect the cables for the side markers cause it got late. I had a boost logic catless dp installed by The Shop Houston and now my AWE track exhaust sounds even more insane. It went from gunshots to dynamite sounds.

Bonus pics the car I bought my son for his birthday came in. He loves it.

I also have a Turbulence Gray Supra and got my son a black GR86.

 

[GRSupraguy]

@Souprahman
@GRSupraguy
@DarkZupra

How Are you guy's sideskirts fitting? I've noticed my tape has left it's original position and the skirt now refuses to fully cover the black OEM skirt (even with some pressure put on it) below the front of the doors.

What side skirt is that? I have adro it’s almost full proof to install. Regardless of the brand or type if you’re bolting it in place it shouldn’t be moving.

 

[Kiske]

What side skirt is that? I have adro it’s almost full proof to install. Regardless of the brand or type if you’re bolting it in place it shouldn’t be moving.

Adro. When I put it on in January it fit perfectly flush. I just noticed it nolonger sits flush to the top in the front where the femder meets the door. The back is fine where it 'hooks' around the fin part. All the screws are still in place on the bottome so nothing moved there...

Curious if anyone else with the kit has noticed this over time or with driving, or if I'm being too picky on the fitment.

 

[racebuild]

Trimmed/fitted all the factory panels to clear the Walker Pro Motorsport roll bar.

Relocated JRZ canisters to the roll bar, still need to install the bushings that fit between the canisters/roll bar.

 

[quikslipper]

yup, ya got me!

 

[FLtrackdays]

Cusco Trunk Brace/Harness Bar was painted gunmetal/silver last week and installed today. Picked a shade somewhere between my OEM turbulence and the replaced aluminum bar's finish as the blue wasn't doing it for me.

Fantastic job I’d like to go the same route. Retain the rear tonneau cover. What seats are you going with?

 

[Tacoma714]

Sent in oil sample to Blackstone recently and got the analysis back today

What brand of oil?

 

[ky.supra]

What brand of oil?

Liquimoly

I did five oil changes with the 0W20 kit at 5,000 miles interval and then switched to their 5W30 kit with three oil changes at 3,000-5,000 interval.

 

[DarkZupra]

@Souprahman
@GRSupraguy
@DarkZupra

How Are you guy's sideskirts fitting? I've noticed my tape has left it's original position and the skirt now refuses to fully cover the black OEM skirt (even with some pressure put on it) below the front of the doors.

Mine is still in place. Ive done these type of skirts before and typically you have to REALLY press on the skirt as you screw it in or the tape will bear the brunt of the force as it tries to pull away.

 

[TYMBOM]

This winter I have done my hitch, new 3rd brake light, the Velossa ram air, catless downpipe, exhaust, midway through transmission swap, got my drag pack and had them powder coated and this is what I chose to share
I love the small details. The before and after.
The blue goes with everything else in the car.

 

[djmad]

Shaved some weight in the engine bay. Probably only a few grams .

 

[Rensuhlo]

Got some of my track photos back from Barber Motorsports Park in Alabama. You'll notice the car is back to being the OE nitro yellow without any type of "sponsor" stickering. I guess I got bullied so hard by a bunch of grown men on a forum.

(JK, I have more stickers to add back to it)