What size spacers...

[Blobbered]

15MM F / 18MM FC Spacers lowered on HKS Adjustable

15 by _stephent, on Flickr

17 by _stephent, on Flickr

Do you have any pics or information on how it fit before lowered? I wanted to do 15/18 but concerned that it will have issues if ride height is not lowered.

Sponsored

 

[CarGuy11]

Anyone have issues with spacers making clicking sounds under hard cornering (heard in video)? I believe its due to aluminum rotor hat mating to aluminum spacer causing galling.

 

[xcon]

On HKS springs, and 13 mm spacers all around

Your car looks great. Who's spoiler are you running on the rear?

 

[jvang85]

Just installed H&R springs with H&R spacers yesterday. 18mm front and 20mm rear. Quick pics with my phone and it just rained so car is filthy.

Your wheel gap is too large. You should check that you don't have those factory spacers left on your shocks. Here's my ride with the same H&R springs and Burgers 13 mm front and 15 mm rear spacers. I only have a finger sized gap between the tires and the fender well. Maybe it's just the angle.

 

[yfeghhi]

Your wheel gap is too large. You should check that you don't have those factory spacers left on your shocks. Here's my ride with the same H&R springs and Burgers 13 mm front and 15 mm rear spacers. I only have a finger sized gap between the tires and the fender well. Maybe it's just the angle.

Didnt notice during spring install but also didnt check the rear since we dont have to mess with those struts. Heres a pic a week or 2 after install. Ill have to check when I get my wheels in and jack up the car.

 

[jvang85]

Didnt notice during spring install but also didnt check the rear since we dont have to mess with those struts. Heres a pic a week or 2 after install. Ill have to check when I get my wheels in and jack up the car.

You seem to be much lower in this picture. What's your gap between the tires and wheel well?

 

[Raskita]

I am running ECS 15/12.5mm
15 Front
12.5 Back

what is your tire size at rear?

 

[METAL]

Just ordered some Motorsport Hardware wheel spacers 15mm/17mm, while I wait for my Advan Racing Beyonds.

Will be lowered on HKS HAS.

 

[Powaup]

BMS 13mm spacers all around and lowered on H&R springs.

Wow that's hot. this has to be the standard for HR lowered cars from now

 

[Trebuh]

Installed mine this morning, I didn’t grab a pic of the front, but I think the rears look good.


Stock:

13mm Burger Spacers:

FYI, my standard floor jack worked. I used the BMW spacer/adapter (as seen in the photo) but I was happily surprised that I didn’t need to buy a low-profile jack.

Woow, looks very good, thank for photos

Also i recommend best shop with motorcycle screens, great price, fast shipping, kind support and of course high quality products much better than Givi or another Chinese rubbish - really recommend products this Polsih company. Windscreen came after just few days, was solid secured and installation was fast and not complicated, it seems to be carefully made and everything fitted ideal on my Aprilia. If you looking for a windscreen for your Aprilia get a motorcycle windscreen or windshield for Aprilia ETV 1200 CAPONORD 2013 2014 2015 . It makes the motobike look a lot more aggressive and pushes the wind higher on your body so you can ride comfortably on the highway at any speed. Great replacement for my faded windscreen plus this windshield is the best looking windscreen in the market for my bike.

 

[Guardians_mk5]

Here’s my old setup with 295/30/19 with 25mm spacers rear
front 20mm with 255/40/19

Any rubbing issues running 20mm in the fronts? Ig:Guardians_mk5

 

[APanoMKV]

I have the bms 10mm in front and 13mm in rear (although I kinda wish I went for 15 in the rear but oh well) and was wondering if anyone found a nice set of wheel locks that fit with and look good with those spacers.

 

[TheBayA90]

I'm completely new to wheel spacers. Looking into the 13mm spacers for the front and rear. Due to absolutely needing wheel locks I figured I would do the same spacers for both the front and rear. Is anyone able to point me in the right direction when it comes to wheel locks? I will be using the stock wheels.

 

[MR_X]

MH 15mm spacers all around. Will install H&R springs next weekend.

 

[Spoiler]

I have a set of 4 locking lug bolts (one per wheel) that came with the car. I do not have the 4 OEM lug bolts that came off. This won’t be an issue when I install BMS spacers will it? I just ordered sets of 13mm and 15mm and was just wondering.

It seems to me like it should be no different than the stock parts, but I thought I would ask…

(edited, as I mentioned nuts, but it is actually lug bolts)

Sponsored