wheeliedub's 21' Drag Build

[wheeliedub]

Hey guys,

I'm new to the forum but am beginning a drag/street build of my 21' 3.0 Premium. I will post pictures/performance results as progress is made. Check out the shop helping me achieve my goals Harrison Performance (Instagram Link). They’re awesome and I wouldn’t go to anyone else for this type of work!

Current Accomplishments
9.28@147 in AZ DA of 5000ft (Stock engine/upgraded turbo)
4.82 60-130 (Stock engine/upgraded turbo)


GOALS
- 1100+ Whp (currently makes 1030 on E70 pump)
- Reaching for mid to low 8 second 1/4.

ENGINE/TRANSMISSION MODS
- CP PISTONS/RODS
- ARP STUDS/BOLTS
- LOW STALL TC
- Line lock kit
- ECUTEK PRO TUNE ON E85 (MARIN TUNED)
- PRECISION 6870
- ARCHER FABRICATIONS/HARRISON PERFORMANCE CUSTOM 6-PORT MANIFOLD
- ARCHER FABRICATIONS/HARRISON PERFORMANCE DOWNPIPE
- ARCHER FABRICATIONS/HARRISON PERFORMANCE INTAKE
- OPEN DUMP
- CSF HIGH PERFORMANCE HEAT EXCHANGER
- EOS A90 / B58 UPRADED INTERCOOLER MANIFOLD G20 F30
- EOS PORT INJECTION KIT
- TITAN MOTORSPORTS UPGRADED AXLES BY DRIVESHAFT SHOP
- Harrison Performance Dual Pump setup

SUSPENSION MODS
- KW V3 COILOVER SUSPENSION
- SPL PARTS REAR END COMPLETE SUSPENSION KIT
- PURE DRIVETRAIN SOLUTIONS STAGE 2 TRANSMISSION

INTERIOR MODS
- EAST COAST SUPRA STEERING WHEEL

EXTERIOR MODS
- BELAK SERIES 3 DRAG WHEELS
- STREET HUNTER CARBON FIBER REAR SPOILER / WING (IN FRP)

Current setup/parts Pictures

Sponsored

 

[underdonk]

Hoooolllllleeeeeeyyyy sheeeeeet $10k for that upgraded tranny. Great looking car - can't wait to see the results!

 

[Okvilln]

Subscribed. Keep us posted.

 

[wheeliedub]

Update: Added some more photos/current parts to post. Build is moving along.

 

[Axix23]

i love that wing man!

 

[wheeliedub]

i love that wing man!

Thanks man! It really brings the body lines together imo. Car seemed naked without it

 

[wheeliedub]

Update 08/07/21 : car is being sent off to get a custom exhaust manifold made and then Harrison Performance will be selling manifolds based off my car’s concept. This build will be done in a couple weeks. We are now hoping to hit 900whp before breaking into the bottom end and stroking the motor.

 

[wheeliedub]

Update 9/26/21 : The precision 6870 has been sent off to get mounted to a custom exhaust manifold being made in collaboration with Harrison Performance and Archer Fabrications. While this is getting finalized, we are working toward installing the Nitrous outlet kit and clearing room in the engine bay for a clean install of the manifold/turbo kit. Progress is looking good so far, just working out little details while we have time.

Thread Edit: I have removed some of the non-used parts and replaced them with the parts currently in use. I will be posting a "For Sale" thread with the AMS intake, chargepipe, and Boost Logic downpipe shortly for those interested.

 

[wheeliedub]

Update 12/24/21: All parts are back from fabrication and are being installed into the car. Fuel setup is being completed and second pump and lines have been installed. EOSpeed manifold has been installed and charge pipe has been temp installed to see what all needs to be relocated/removed for this setup. Car should be done shortly. I will be out of state for a month so I won’t have any updates for a bit until the car is finished/tuned. Pics will be posted soon.

 

[wheeliedub]

Update: Engine build is done. Going back into the car next week and then it’s going through it’s break-in/shake down process. Hoping to get some new times in the next month

 

[zrk]

Update: Engine build is done. Going back into the car next week and then it’s going through it’s break-in/shake down process. Hoping to get some new times in the next month

hellllllll yeah.

 

[zrk]

Update: Engine build is done. Going back into the car next week and then it’s going through it’s break-in/shake down process. Hoping to get some new times in the next month

You going to make it to Atco?

 

[wheeliedub]

You going to make it to Atco?

Prob not. Next event I’ll be at for sure will be Supras in Vegas

 

[wheeliedub]

 

[kaj]

Sometimes I miss the simplicity of drag racing. More money, more power, more tire, go faster.
I'm over here tuning suspension and aero and crap

Sponsored