OneTimeAccount
Well-Known Member
Nice to hear feedback. I assume you really feel the difference when pushing the car through the corners. Daily driving feels pretty much the same, maybe a bit more responsive.
What did you do to your Supra today?
- Thread starter Ryanthetemp
- Start date
- Watchers 564
type-964
Well-Known Member
- Joined
- Nov 16, 2020
- Threads
- 11
- Messages
- 371
- Reaction score
- 587
- Location
- Nowhere now here
- Car(s)
- A91 Supra
The car feels less “weighty” in the corners as the suspension loads up and the traction transitions to the last 9/10ths.
Escapist
Well-Known Member
Took her to her first but definitely not last track day. I may just turn my MKV into a dedicated track car cause these things are so well balanced; keeping it on the street is a waste.
Going to invest in some handling mods like sway bars and definitely wider tires, brake pads are a must as well.
Going to invest in some handling mods like sway bars and definitely wider tires, brake pads are a must as well.
Escapist
Well-Known Member
My chassis malfunction notification came on during the cool down lap of my last session yesterday, has that happened to you? It hasn't come on again but I found that odd. I was wondering if I clipped my ride height sensor cause session 4 was pretty damn aggressive and my car is lowered.Racing today. So far after the first session, I'm sitting in 1st! We will see what the rest of the day brings.
Don Alex
Well-Known Member
I got the same one here, I cant get the stock one out. I have even scratched my stock button and the part around it...Finally got my old push start button out to replace with the golden wrench one, only took me a year to do haha
BrettS
Well-Known Member
- Joined
- Nov 28, 2016
- Threads
- 38
- Messages
- 1,294
- Reaction score
- 2,866
- Location
- Alberta, Canada
- Car(s)
- 2016 Scion IM/2020 supra
- Vehicle Showcase
- 1
I was in that same boat, used a bunch of different tools/3m tape but ultimately had to buy clay bar and worked no problem
- First Name
- Phillip
- Joined
- Dec 15, 2020
- Threads
- 53
- Messages
- 2,240
- Reaction score
- 3,266
- Location
- South Florida
- Car(s)
- 2023 Burnout A91 MT
few things, swapped to ecutek with a visconti custom tune, will update my experience once we are done "tuning" as I don't want to say anything before this process is fully done and got my VOLK Racing Te37 Track edition II's on the car with 275 and 295's in the rear.
Deleted member 6088
Guest
drove 45 miles one way for Krispy Kreme… Quick rip on the hwy with a couple 110 mph bursts
Evolution
Well-Known Member
Nope havent seen anything weird pop up besides the car not liking my cold tire pressures. My car is all stock right now. Next track day should have lowering springs and a downpipe on.
cvondra
Well-Known Member
- First Name
- Chad
- Joined
- May 8, 2021
- Threads
- 5
- Messages
- 120
- Reaction score
- 81
- Location
- Midwest US
- Car(s)
- 2021 Supra 3.0 Premium, 2021 BMW X6 M50i
Dammit I was over the TE37s until I saw this. LOVE the colorway.few things, swapped to ecutek with a visconti custom tune, will update my experience once we are done "tuning" as I don't want to say anything before this process is fully done and got my VOLK Racing Te37 Track edition II's on the car with 275 and 295's in the rear.
SupraDC
Well-Known Member
- First Name
- Mark
- Joined
- Aug 25, 2021
- Threads
- 15
- Messages
- 280
- Reaction score
- 484
- Location
- Arlington, Virginia
- Car(s)
- 2020 Supra
Fixed the subwoofer today.
underdonk
Well-Known Member
Took my '21 to the dealership for its first ToyotaCare service (oil change + multi-point inspection) and had the ECU flashed for the brake assist recall. I know people don't like to take their cars to the dealership for service as they seem to always have a bad experience, but I love my dealership's service department. They don't care that I have my car modded and seem to really enjoy the fact that it is. I always take it in with the JB+ installed and all the other stuff I have done to it. They work on a bunch of Supras and know how to handle them. PM me if you're looking for a good one in Central KY!
On another note, I knew I should have written down what I changed in Bimmercode! Oh well, will be fun to dig into t again and get it all setup. I saw someone mention it does a backup of your configuration every time you code something, but I've never seen an indication of this. Will have to poke around.
On another note, I knew I should have written down what I changed in Bimmercode! Oh well, will be fun to dig into t again and get it all setup. I saw someone mention it does a backup of your configuration every time you code something, but I've never seen an indication of this. Will have to poke around.
Traxion
Well-Known Member
- Joined
- Oct 6, 2021
- Threads
- 9
- Messages
- 461
- Reaction score
- 754
- Location
- Southeast, USA
- Car(s)
- 2022 Toyota Supra 3.0 Premium
I had tried doing some of my own vinyl accents but working with knifeless tape proved to be a little more difficult than expected and I couldn't get clean lines that I was happy with. I removed that this weekend and replaced it with 1/2" and 1/4" vinyl stripes on a roll and am much happier with the result. Turning corners with it was a bit more difficult but the straight edges on the stripes are a lot more crisp.
