What did you do to your Supra today?

[type-964]

Installed the aFe front sway bar just in time for my next track day tomorrow.

Also discovered what a couple of cones do to your plastic under panels when you run them over… won’t post any photos of those lol.

I was super impressed with what my Cuscos did for the car’s handling. Much happier with it now vs stock bars.

 

[OneTimeAccount]

I was super impressed with what my Cuscos did for the car’s handling. Much happier with it now vs stock bars.

Nice to hear feedback. I assume you really feel the difference when pushing the car through the corners. Daily driving feels pretty much the same, maybe a bit more responsive.

 

[type-964]

The car feels less “weighty” in the corners as the suspension loads up and the traction transitions to the last 9/10ths.

 

[Escapist]

Took her to her first but definitely not last track day. I may just turn my MKV into a dedicated track car cause these things are so well balanced; keeping it on the street is a waste.

Going to invest in some handling mods like sway bars and definitely wider tires, brake pads are a must as well.

 

[Evolution]

Racing today. So far after the first session, I'm sitting in 1st! We will see what the rest of the day brings.

 

[Escapist]

Racing today. So far after the first session, I'm sitting in 1st! We will see what the rest of the day brings.

My chassis malfunction notification came on during the cool down lap of my last session yesterday, has that happened to you? It hasn't come on again but I found that odd. I was wondering if I clipped my ride height sensor cause session 4 was pretty damn aggressive and my car is lowered.

 

[BrettS]

Finally got my old push start button out to replace with the golden wrench one, only took me a year to do haha

 

[Don Alex]

Finally got my old push start button out to replace with the golden wrench one, only took me a year to do haha

I got the same one here, I cant get the stock one out. I have even scratched my stock button and the part around it...

 

[BrettS]

I got the same one here, I cant get the stock one out. I have even scratched my stock button and the part around it...

I was in that same boat, used a bunch of different tools/3m tape but ultimately had to buy clay bar and worked no problem

 

[NitroYellowMKV]

few things, swapped to ecutek with a visconti custom tune, will update my experience once we are done "tuning" as I don't want to say anything before this process is fully done and got my VOLK Racing Te37 Track edition II's on the car with 275 and 295's in the rear.

 

[Deleted member 6088]

drove 45 miles one way for Krispy Kreme… Quick rip on the hwy with a couple 110 mph bursts

 

[Evolution]

My chassis malfunction notification came on during the cool down lap of my last session yesterday, has that happened to you? It hasn't come on again but I found that odd. I was wondering if I clipped my ride height sensor cause session 4 was pretty damn aggressive and my car is lowered.

Nope havent seen anything weird pop up besides the car not liking my cold tire pressures. My car is all stock right now. Next track day should have lowering springs and a downpipe on.

 

[cvondra]

few things, swapped to ecutek with a visconti custom tune, will update my experience once we are done "tuning" as I don't want to say anything before this process is fully done and got my VOLK Racing Te37 Track edition II's on the car with 275 and 295's in the rear.

Dammit I was over the TE37s until I saw this. LOVE the colorway.

 

[SupraDC]

Fixed the subwoofer today.

 

[underdonk]

Took my '21 to the dealership for its first ToyotaCare service (oil change + multi-point inspection) and had the ECU flashed for the brake assist recall. I know people don't like to take their cars to the dealership for service as they seem to always have a bad experience, but I love my dealership's service department. They don't care that I have my car modded and seem to really enjoy the fact that it is. I always take it in with the JB+ installed and all the other stuff I have done to it. They work on a bunch of Supras and know how to handle them. PM me if you're looking for a good one in Central KY!

On another note, I knew I should have written down what I changed in Bimmercode! Oh well, will be fun to dig into t again and get it all setup. I saw someone mention it does a backup of your configuration every time you code something, but I've never seen an indication of this. Will have to poke around.