Made the changes:
For sure. you can bump it up a little. You said JB4 showed E at 34%, you can try 40%.
Ok I will up the E content which would mean the JB4 will show 40% and the Fuel It app will show about 35%.
Oh I forgot lol. In that case, go ahead and turn up FF by 5 for the next pull. And yes still to the duty 3000
Sorry for the delay. It looks good, but there is room for improvement. You have plenty of octane. try this out:
| map6_15 | map6_20 | map6_25 | map6_30 | map6_35 | map6_40 | map6_45 | map6_50 | map6_55 | map6_60 | map6_65 | map6_70 |
1 | 1.5 | 2 | 3 | 4 | 5 | 6 | 7 | 7 | 6 | 5 | 4 |
| duty_15 | duty_20 | duty_25 | duty_30 | duty_35 | duty_40 | duty_45 | duty_50 | duty_55 | duty_60 | duty_65 | duty_70 |
30 | 30 | 30 | 36 | 34 | 34 | 34 | 51 | 66 | 62 | 64 | 64 |
FF 50, FOL 80@ColonelAdama Here is the log:
https://datazap.me/u/dven11/log-173...-5-6-8-9-11-14-18-20-25-26-27-28-29&zoom=1-54
I accidentally over filled on E85. My Fuel It app was at E45. Im going to bring it down to E40 so you can take a look at that as well. I appreciate the help! Don't apologize for the delay at all
| duty_15 | duty_20 | duty_25 | duty_30 | duty_35 | duty_40 | duty_45 | duty_50 | duty_55 | duty_60 | duty_65 | duty_70 |
| 30 | 30 | 30 | 36 | 34 | 34 | 34 | 51 | 64 | 58 | 62 | 62 |
Looks alright, drop FF to 50 and try again,. throttle closure means FF is too high
@ColonelAdama Made the changes and logged. The E content is the same still.
| duty_15 | duty_20 | duty_25 | duty_30 | duty_35 | duty_40 | duty_45 | duty_50 | duty_55 | duty_60 | duty_65 | duty_70 |
| 30 | 30 | 30 | 36 | 32 | 34 | 34 | 54 | 64 | 56 | 62 | 62 |
FF 45 and Firmware V24 or newer next
@ColonelAdama I made the changes, and the car went into limp mode on the first log. I pulled over, turned off the car, and tried again. A lot of hesitation at FF 52. I went ahead and dropped it down to FF 50 and the car felt better. I double checked everything to make sure I didn't input things incorrectly, but everything was fine.
