Airbag error lights/warnings easy coding!

[Yuri]

Spent the day trying to hack the belt sensor. Yes it’s Hall effect one with very small magnet and steel piece that slide in when buckled in. Unlikely to work with resistor but will test again. Anyway my questions for the belt itself. When removed there is pretensioner on it 2.3 ohm. After coding you don’t get errors with belt removed and buckle under seat installed is this correct without any resistors on place of the belt pretensioner ?

Sponsored

 

[Ahmad]

Just sharing my experience.

I was able to code out the airbag sign after installing aftermarket seats. But now I get the seatbelt flashing light non stop. I tried few tricks but nothing working to stop the belt flashing light…

 

[rwense]

Just sharing my experience.

I was able to code out the airbag sign after installing aftermarket seats. But now I get the seatbelt flashing light non stop. I tried few tricks but nothing working to stop the belt flashing light…

Did you reconnect anything afterword?

Sponsored