Been trying to sell mine for months.
Have you tried a salvage yard?
I haven't yet tried a salvage yard. I'm kind of leaving that as a last option given the price I'll get, BUT at least I'll get some cash rather than have a set of seats sitting around doing nothing. I think the last option is going to be to post 'em on a sim racing site and give Facebook Marketplace a shot, though I doubt the latter will be worth the time given the limited reach.
Thx for the info
Surprisingly, she’s happy now. Good luck with your surgery & hope you get well soon!!!!
So I can't seem to get my cruise control to work anymore... I coded out the errors minus my seat belt light kept flashing...Just wanted to add a bit of clarity to the thread in case someone is looking for seats.
As long as you unplug the battery before install and re-connect the seat belt receptical to the OEM harness under the seat (white male connector that connects to the farther black female connector) you will still retain all functions including cruise control.
HOWEVER, you will have a persistent error for the driver's harness. It's annoying but at least it doesn't impede other functions.
See the rest of the thread for coding that out. I know there has been an update to the bimmergeeks protool app so the current process may or may not work.
I also recommend the Macht Schnell mount + rails! Overall it fit pretty well, instructions could be a bit more precise but not bar all things considered.
Are you sure you have the seat belt receptical connector connected to the harness emerging from the carpet?
Yeah it is, i saw someone else have this same issue so not sure. Wish some coders could chime in cause i think this is why my cruise control stopped working
Hmmm interesting. Yeah I installed my seat and didn't connect that which threw the cruise control error. After disconnecting the battery, reconnecting that harness, and reconnecting the battery it went away
Here is my current setup. Took a bit of exploration of different parts to get it just right for me.
Seat:
Sparco Evo QRT
Side mounts:
Brey-Krause R-9261
Floor mounts:
Macht Schnell liteweight floor mounts 70.10.111
note: I only used these to raise the seat up a little as it was too low for me with just the Brey-Krause side mounts.
Harness:
Schroth Profi II ASM + Six point add-on
Brey Krause R-9259 sub mount add-on for seat side mounts (allows six point addition)
OEM seat belt add-on:
Seat Belt Extender Pros
This allows the right side of the OEM seat belt to be safely used through the side of the seat instead of over (when driving on the street)
Airbag and seat position errors:
Coded out via BimmerGeeks Protool app
https://www.supramkv.com/threads/airbag-error-lights-warnings-easy-coding.14617/
Do u mind sharing what Seat Belt Extender you are using? I'm about to install Sparco circuit in mine, and I'm planning to keep the factory 3-point for driving to the trackHere is my current setup. Took a bit of exploration of different parts to get it just right for me.
Seat:
Sparco Evo QRT
Side mounts:
Brey-Krause R-9261
Floor mounts:
Macht Schnell liteweight floor mounts 70.10.111
note: I only used these to raise the seat up a little as it was too low for me with just the Brey-Krause side mounts.
Harness:
Schroth Profi II ASM + Six point add-on
Brey Krause R-9259 sub mount add-on for seat side mounts (allows six point addition)
OEM seat belt add-on:
Seat Belt Extender Pros
This allows the right side of the OEM seat belt to be safely used through the side of the seat instead of over (when driving on the street)
Airbag and seat position errors:
Coded out via BimmerGeeks Protool app
https://www.supramkv.com/threads/airbag-error-lights-warnings-easy-coding.14617/
