Euro Performance Center Femto DME Unlock Journey to Finland Live

[3TMagnetMan]

Finally received my ECU today.

Did you plug it in and is it working???

Sponsored

 

[MSport]

That's what I said... then i tried E50

Idk, ?, now after a full pulls I want to kinda see the e blend

 

[ArmenLS1]

Did you plug it in and is it working???

Yes sir, I installed the ecu and drove around a bit without flashing, get the battery up and charged. This morning I connected with the BM3 guys and had them remote in and help flash. Only because of the issue I had previously with the WIFI dongle and ecu getting brickeronnied, lol.

We installed Stage 2 multimap - i'm not running flex fuel or anything, just set it to Map 3, which is 93. She definitely rips. I do need to adjust the burbles though. At age 41 i'm not just digging it lol.

Now it's time to log and see what's going on. And fix this damn EVAP issue, lol

 

[a90fresh]

Yes sir, I installed the ecu and drove around a bit without flashing, get the battery up and charged. This morning I connected with the BM3 guys and had them remote in and help flash. Only because of the issue I had previously with the WIFI dongle and ecu getting brickeronnied, lol.

We installed Stage 2 multimap - i'm not running flex fuel or anything, just set it to Map 3, which is 93. She definitely rips. I do need to adjust the burbles though. At age 41 i'm not just digging it lol.

Now it's time to log and see what's going on. And fix this damn EVAP issue, lol

Glad you got everything working..! @ArmenLS1 ??️

 

[MSport]

Yes sir, I installed the ecu and drove around a bit without flashing, get the battery up and charged. This morning I connected with the BM3 guys and had them remote in and help flash. Only because of the issue I had previously with the WIFI dongle and ecu getting brickeronnied, lol.

We installed Stage 2 multimap - i'm not running flex fuel or anything, just set it to Map 3, which is 93. She definitely rips. I do need to adjust the burbles though. At age 41 i'm not just digging it lol.

Now it's time to log and see what's going on. And fix this damn EVAP issue, lol

Same on burbles switched to off. OEM sounds like gun shots

 

[ArmenLS1]

Same on burbles switched to off. OEM sounds like gun shots

Did you just adjust using the live updater?

 

[a90fresh]

Did you just adjust using the live updater?

How do you use the Live Updater? Do we need a OBD2 2-way splitter so we have both (OEM plug and BM3) plugged in while driving?

 

[ArmenLS1]

How do you use the Live Updater? Do we need a OBD2 2-way splitter so we have both (OEM plug and BM3) plugged in while driving?

I have both the dongle V3 from bm3 and the yellow cable with ethernet ---> usb adpater. You connect to the car when it's running, ( no need to be in diagnostic mode), and adjust the maps, and now I read you can change other parameters as well, such as burbles, etc... without having to reflash. This is the great part bout customRom.

 

[MSport]

I have both the dongle V3 from bm3 and the yellow cable with ethernet ---> usb adpater. You connect to the car when it's running, ( no need to be in diagnostic mode), and adjust the maps, and now I read you can change other parameters as well, such as burbles, etc... without having to reflash. This is the great part bout customRom.

I just used the little cog at the top of the map and went down to burbles and adjusted it. I reflashed because it only takes about 10 secs for me.

 

[ArmenLS1]

I just used the little cog at the top of the map and went down to burbles and adjusted it. I reflashed because it only takes about 10 secs for me.

Yeah that's another option I guess, i'm just paranoid to flash if there is no need to flash lol

** Live Adjust screen takes Map Configuration a step further and applies changes to a running vehicle, without reflashing. Adjust exhaust burble on the fly, no re-flashing. Ethanol Sensor Content % Override - Useful in cases where ethanol sensor may have become faulty.

 

[MSport]

Yeah that's another option I guess, i'm just paranoid to flash if there is no need to flash lol

** Live Adjust screen takes Map Configuration a step further and applies changes to a running vehicle, without reflashing. Adjust exhaust burble on the fly, no re-flashing. Ethanol Sensor Content % Override - Useful in cases where ethanol sensor may have become faulty.

Good info

 

[a90fresh]

I have both the dongle V3 from bm3 and the yellow cable with ethernet ---> usb adpater. You connect to the car when it's running, ( no need to be in diagnostic mode), and adjust the maps, and now I read you can change other parameters as well, such as burbles, etc... without having to reflash. This is the great part bout customRom.

Thx ? @ArmenLS1, got the factory downpipe off earlier today, installing MAD Fatboy 5” downpipe tmr, looking forward to trying out Live Updater, Anti-Lag on BM3 Map 2 as soon as it’s on tmr ?, will let everyone know how it runs ?.

 

[OldHead-MKV-Owner]

Same on burbles switched to off. OEM sounds like gun shots

Yup, same here. My wife asked me if i broke my car... i was thinking, I'm not sure lol. Definitely adjusted it. Pretty much off now.

 

[a90fresh]

Yup, same here. My wife asked me if i broke my car... i was thinking, I'm not sure lol. Definitely adjusted it. Pretty much off now.

Mine sounds like gunshots as well ? did you just disable it or adjust the settings real low?

 

[OldHead-MKV-Owner]

Yeah that's another option I guess, i'm just paranoid to flash if there is no need to flash lol

** Live Adjust screen takes Map Configuration a step further and applies changes to a running vehicle, without reflashing. Adjust exhaust burble on the fly, no re-flashing. Ethanol Sensor Content % Override - Useful in cases where ethanol sensor may have become faulty.

Nice. Do you have to have multimap unabled to access the Live Adjust screen?

Sponsored