Emmanuel23191
Well-Known Member
- Thread starter
- #46
can y’all lead me in the right direction and I’ll do thatI'd email MHD or something about this, honestly.
Sponsored
can y’all lead me in the right direction and I’ll do thatI'd email MHD or something about this, honestly.
Here is an example of an MHD tuned datalog on E40. You can see boost, IAT's, rpm and timing.i did everything YouTube could offer I had no one local or even near me so I had to work with what I had
This def isn't your fault, OP. I don't think anyone is coming at you, we're just tryna help. You're obviously pushing more boost than stock, so the flash "worked." Something with the tune is messed up.i did everything YouTube could offer I had no one local or even near me so I had to work with what I had
[email protected]can y’all lead me in the right direction and I’ll do that
That's a solid log.Here is an example of an MHD tuned datalog on E40. You can see boost, IAT's, rpm and timing.
https://datazap.me/u/sereph102889/example-log?log=0&data=3-11-12-20-23-24-25-26-27-28
I can tell mine looks way more than terribleHere is an example of an MHD tuned datalog on E40. You can see boost, IAT's, rpm and timing.
https://datazap.me/u/sereph102889/example-log?log=0&data=3-11-12-20-23-24-25-26-27-28
Even 10 degrees of timing is a little low, honestly.
In the meantime I would get that tune off the car. Flash it back to "Stage 0". Be sure to select Stage 0 because if you use the option on the other page it's going to flash it back to stock and re-lock the ECU.I sent out an email of the data log. Should I do something while I wait such as maintenance or look for something broken or something ? I was worried about that time that’s why I’m here
Will do and it’s back on stock powerIn the meantime I would get that tune off the car. Flash it back to "Stage 0". Be sure to select Stage 0 because if you use the option on the other page it's going to flash it back to stock and re-lock the ECU.
Just to be sure, you did purchase the MHD Super License for the B58, Toyota Supra, correct?
When you plug your MHD Dongle into the OBD2 port as if you're going to flash a tune, under Tune<Flash a MHD Map, what does your header say? It should look like this for example at the top:
Notice the difference in the headers? One says M1 maps, the other says O1 maps.
The O1 maps are for the 2021 and up, 6 port cars. The M1 maps are for the 2 port cars. I wonder if something is wrong in your tune license or something.
EDIT: Sorry the pictures are so large, not sure why they are that large.
Yes it’s a 2 port 2020Is your car a 2020 or 2021? Your phone screen shows M1 so I'm assuming it's a 2020, 2-port car?
Ok. At this point I have no idea what is going on with your car and/or the tune, but I would wait for MHD to get back to you and they should be able to handle it from there. How long have you had that tune on the car?Yes it’s a 2 port 2020