What did you do to your Supra today?

[DC5UPRA]

Installed Verus Camber Plates and alignment. Had -2.2 up front before.

 

[Evolution]

Installed Verus Camber Plates and alignment. Had -2.2 up front before.

you may want to double check your top hat bearings aren’t digging into the strut towers. I found that 3.4 was max for the verus hats. 3.5 is where I ran into issues.

 

[DC5UPRA]

you may want to double check your top hat bearings aren’t digging into the strut towers. I found that 3.4 was max for the verus hats. 3.5 is where I ran into issues.

Will do. This is on lowering springs.

 

[Evolution]

Will do. This is on lowering springs.

Lowering springs will only make things worse. You also have to worry about the spring hitting, not just the bearing. I’m on coils so no way my spring is going to rub.

 

[DC5UPRA]

I installed the Fitcamx integrated dash cam today! It fit like a glove! Very easy plug and play install.

Any issues getting original cover off?

FYI anyone interested using promo TECHJEFF on their website makes it $170 for 4k front camera only with free shipping.

 

[i3igpete]

Lowering springs will only make things worse. You also have to worry about the spring hitting, not just the bearing.

Can confirm, I only got about -2.9 deg on HKS springs before the coils rubbed the wall of the tower.

 

[gmarcucio]

Any issues getting original cover off?

FYI anyone interested using promo TECHJEFF on their website makes it $170 for 4k front camera only with free shipping.

No problem getting my original cover off. Insert plastic molding tool into center and split the two halves apart.

 

[gmarcucio]

Added some Carbon Fiber and an aluminum Performance emblem to steering wheel today

 

[lucky phil]

Nice emblem. Source?
Phil

 

[gmarcucio]

Nice emblem. Source?
Phil

Thanks, I purchased on Amazon

 

[lucky phil]

Thanks, I purchased on Amazon

Thanks
Phil

 

[BMWAF]

Rear bar added: ADRO v1 complete.

Should I get a small extension made to extend those lovely AWE exhaust tips out a bit?

@Josh/AWE See what I mean?

 

[Stedy]

Should I get a small extension made to extend those lovely AWE exhaust tips out a bit?
@Josh/AWE See what I mean?

A bit of an extension would be good otherwise you'll be forever cleaning that thing.

 

[BMWAF]

A bit of an extension would be good otherwise you'll be forever cleaning that thing.

Yeah.. my thoughts too. I'll look into seeing what I can do, although I haven't heard anyone else doing it? Hopefully it won't affect the anti-drone voodoo.

 

[FLtrackdays]

Yeah.. my thoughts too. I'll look into seeing what I can do, although I haven't heard anyone else doing it? Hopefully it won't affect the anti-drone voodoo.

That’s too bad it does hide the exhaust. Do they make a smaller/ thinner version they’d let you swap out?