What did you do to your Supra today?

[VA90]

I did tadda's active sound design deletion mod. Big thank you to you for the excellent write-up.

I have an AA catted downpipe and wow this car is quiet. I love that audio sounds noticeably better in sport mode though.

 

[Sereph102889]

Thank you! Appreciate it...

Steve

When you installed the Maxton pieces, mainly the sides and spats, did you use screws and a drill or just 3m tape? Mine should be arriving this Friday so I'm trying to get an idea. I know the front has screws and drill holes but I've never seen anyone show whether or not the sides and rear spats have drill hole markings.

 

[freeform911]

When you installed the Maxton pieces, mainly the sides and spats, did you use screws and a drill or just 3m tape? Mine should be arriving this Friday so I'm trying to get an idea. I know the front has screws and drill holes but I've never seen anyone show whether or not the sides and rear spats have drill hole markings.

I use both...
I put the pieces in place using the double sided tape then used the self tapping screws about 6" apart..
(included in the boxes)...
For the front you use all factory mounting points and the supplied hardware....
I added a few self tapping screws to the back end of the lip just because I didn't like the way it fit without them...

Install is a breeze..does help if you got a second set of hands to help line everything up though...

Good luck...
Need pics when done..

Steve

 

[Evolution]

Started doing the @tadda sub box mod today. Still waiting on some more foam/sound deadening stuff and the outlets to get here. How it is, night and day better.

This weekend is looking promising for getting stuff done too. Hopefully lowering springs, down pipe and JB4 can all get done. Got to wash it too. Been over a month haha.

 

[Toshi]

I didn't want to create a whole new thread for this so I'll just ask this here!

What kind of tint is this? and would it look good on a Nitro yellow Supra?

 

[peppersam740]

I didn't want to create a whole new thread for this so I'll just ask this here!

What kind of tint is this? and would it look good on a Nitro yellow Supra?

Not legal in U.S. It reflects sunlight.

 

[Mimosa]

I changed out and modified the coupler for the charge pipe. Then I removed the Cusco strut brace and replaced it with Torque Solution's version. There was a space issue with the Cusco version because of the new manifold.

 

[type-964]

I think you’ve won the trophy for most impressive engine bay on this forum (at least that I’ve seen).

Very, very nice!

 

[type-964]

Got the AWE touring resonated installed today.

It’s paired with the AA catted downpipe and sounds awesome. It’s been said before, but no sound clips quite do any exhaust on this car justice.

I really like the stock exhaust (especially with a catted DP), but this is next level epic. I took my time listening to clip after clip because:
A) I’m a picky MF and
B) I was pretty sure I wanted a valved system

Even though there’s no valve on the AWE, I don’t regret it for a moment.

 

[Evolution]

This showed up today!

 

[zrk]

This is on the way. Just shipped.

 

[romanLegion9574]

Got my TS5s in today!

 

[eclpts]

What I did to my Supra was give it a nice bath after returning from a highly enjoyable month-long coast-to-coast trip (Santa Cruz to Blue Hill, Maine and back). The entire time I saw exactly one other Supra, but I wasn't driving -- the other Supra was spotted in a train station parking lot when I was on a train between Albany and New York. My car survived a few adventures including a ferry trip with 5-7 foot waves across Lake Michigan and a sudden snowstorm (in its stock tires) in Cedar City, Utah. And it sure gets a lot of attention. One guy followed me off the freeway into a convenience store parking lot in Brattleboro, Vermont just so he could take a picture of the car. Another guy at a gas station in New Hampshire asked me how high the speedometer went. "Sorry it doesn't really have a speedometer like that." He seemed disappointed.

 

[SooopraSD]

Replaced oem strut bars with CTS bars.

 

[ArtEmortal]

Thanks SOS Customz for the great job you and your team did!
if your wondering:
Seibon Hood
EVS Fenders
13mm spacers around
HKS adj. springs
The glossy black vinyl roof is gonna change, i might wrap it with a CF type vinyl, not sure yet