What did you do to your Supra today?

[Deighvid]

Got both my holes filled today… not that stoked with these Triple Seven plugs. The fit is pretty meh, and why wouldn’t they match the bumper color? I know that 3D printing yields a rough, matte finish but I should have paid more attention when I ordered them. Will need a much nicer solution for the carbon bumper. All the 3D printed stuff I get ends up being actual junk but I don’t learn my lesson ?

Edit: I never should have installed them.

If you ceramic coat that porous 3D printed material, it'll hold a deeper shine way closer to the oem satin black. I did that on my Verus splitter end plates and it's night and day difference. Looks way better.

 

[Deighvid]

@Blindspot
Raw 3D printed material on the Verus Splitter endplates VS ceramic coated

 

[racebuild]

Finally got to those creaky panels.

*** Yes those are @zrk's jeans.

Harness thinning?

Tip: Don’t remove the ambient temp sensor.

 

[FuzzyRev]

Can I purchase your gorgeous seats????

Of course!! They'll probably sell for more than you'd want to pay though, as they're going to come still attached to a munched car..

https://www.copart.com/lot/73979053/2023-toyota-supra-base-wi-madison-south

 

[FLtrackdays]

Not sure what you mean.. Are you asking if you can cut into the metal to make the three small holes one large one?

If that is what you mean, I guess you could but I don't know if it would necessarily improve the sound quality further. It would certainly help getting that damned wadding to line the walls - its hard to tell how successful I was with that, as an aside.

Told you it was dumb, lol. I was hoping that box was hollow & I could just put a 2” drill bit up to it, cut two holes and be done with it. Yeah… never mind. Wishful thinking on my part.

Meanwhile, mine is back at the day spa getting some track work done. Don’t know what’d I do w/out my little MX5. That little 6 speed is still as fun to drive as it was back in 2016. Sound is actually pretty damn good for a convertible. At least for my low standards.

 

[BMWAF]

Told you it was dumb, lol. I was hoping just putting the 2” bit up to the back of the box, cut two holes and be done with it. Yeah… never mind. Wishful thinking on my part.

In his posts, Tadda suggests that around 80% improvement comes from just porting the subwoofer box. If you want to port it via a 2" drill bit, I'm guessing it would do the trick.. but it might look like someone's drilled a 2" drill bit into the panel. ?

 

[razorlab]

Black Friday V730's came in and have been added to my wall o' tires...

 

[ky.supra]

Didn't happen today, figure I do a little update.

I took it to my first track day in September

Added verus wing, verus front canards, and axis fog lights a month later then took it to my 2nd track day earlier this month.

Verus Camber Plates + HKS Adjustable Springs
wedsports wheels 18x10 square with continental ECS 02, 275/40/18 tires all around

I will go on my first track day next month!

 

[razorlab]

Didn't happen today, figure I do a little update.

I took it to my first track day in September

Added verus wing, verus front canards, and axis fog lights a month later then took it to my 2nd track day earlier this month.

Nice, looks like NJMP?

Where are you in NY? Planning on any Lime Rock visits?

 

[rwense]

Got my Triple Seven GT4 hood vent in...now just mentally preparing myself to start cutting holes ?

Also got a Speed Engineering intake snorkel along with 2 free brake duct funnels since once started to deform a bit. Just sent them an email and they offered to replace it no questions asked ?

 

[ky.supra]

Nice, looks like NJMP?

Where are you in NY? Planning on any Lime Rock visits?

Thanks and yes it is NJMP.
I'm based in nyc so it's always a drive for me to get to NJMP.

I plan on going there for next season

 

[razorlab]

Thanks and yes it is NJMP.
I'm based in nyc so it's always a drive for me to get to NJMP.

I plan on going there for next season

Yea LRP would be closer for sure. @garudathree is in Long Island.

 

[rwense]

Yea LRP would be closer for sure. @garudathree is in Long Island.

I'm hoping to hit LRP next season, stayed there for the Gridlife Circuit Legends event and realized I definitely need to come back. It's a hike for me in Pittsburgh but worth it.

 

[razorlab]

I'm hoping to hit LRP next season, stayed there for the Gridlife Circuit Legends event and realized I definitely need to come back. It's a hike for me in Pittsburgh but worth it.

Let me know if you do! Since it's a trek for you I can try and make it a point to go to whatever event you are going to. Except Gridlife. F them.

 

[rwense]

Let me know if you do! Since it's a trek for you I can try and make it a point to go to whatever event you are going to. Except Gridlife. F them.

For sure! Gotta see how slow I am compared to you and @garudathree hahaha