CFactor
Active Member
Looks like a maxton v2
Yep correct. Maxton all around. V2 front with V1 sides and rear spats.
Looks like a maxton v2
Ran it up as usual on the race ramps with extensions (needed due to lip & lowering). Jacked up driver front at jack pad, placing base block under one rear tire, then did the same for passenger. I did need to use my off road jack to then raise high enough to place the second race ramp block. Car is on level ground and the rear top blocks do snug around the shape of the wheel so it shouldn’t be going anywhere. Parking brake engaged as well. In case of some catastrophic failure of the race ramps/blocks, I have jack stands beneath all four jack points with the little puck adapters, or whatever they’re called. Could also chock the front wheels.I'm planning to lift the supra the same way you have here
Can you share how it was done and anything you watch for safety?
Oh man, I'm so sorry. Are they at least going to fix it all?After nearly 3 months of my car being at the body shop, I finally got it back. All I have to say is I am not happy at all. Lots and lots of issues.... someone even ran into the back of it and they let it go like that.
Glad my sharing was of help!
- Wagner Tuning Intake Manifold
- Had a shop do this one for me. I've been trying to suck it up and learn how to install mods myself but didn't want to take the risk on my daily driver.
- Special thanks to @razorlab for all the data he's shared on this manifold. Gave me the confidence to purchase it. I plan on taking the car to the track this year and learning for the first time.
I know this post is pretty old now, any chance you know where your buddy got the red splitters from? I've been working my way as quick as I can through this entire thread and I'm finally almost half way there
Me and a buddy met up to celebrate our other buddy's mom's b-day lol. After that, i went in for my famous "badges install" with the blacked out everything. Then i got to drive it around and feel what a Pure 800 Supra feels like. ? i feel slow now.
Unfortunately, this member got his Supra totalled, and hasn't been active for over a month. I do believe that's the Maxton Design one though.I know this post is pretty old now, any chance you know where your buddy got the red splitters from? I've been working my way as quick as I can through this entire thread and I'm finally almost half way there
Much appreciated, looks like you are correctUnfortunately, this member got his Supra totalled, and hasn't been active for over a month. I do believe that's the Maxton Design one though.
I got it installed at Stryker Performance in Fullerton.Glad my sharing was of help!
What shop did the install? That is a very clean job. I'm assuming they did the EVAP tuck and rerouting of the ECU wiring harness stuff?
What heat shield did you use with the intake? Is that the one that came with the hks intake? I wanted the verus aos but couldn't fit it.
Installed some mods and dressed up the engine bay while I was off work for the past couple weeks. Thank god for holiday shutdowns.
Now I'm waiting on a new engine cover that I can chop in half and use to cover up the rats nest.
- HKS Brace Set
- The rear brace was a pain to install since I don't have a great tool set (will fix this!). Took way longer than I should've to remove & re-install a couple torx screws since I only had a large wrench. They were in awkward spots.
- The rear brace seemed to remove all the creaking I'd hear while going up/down driveways. At the very least, I definitely hear it way less.
- Wagner Tuning Intake Manifold
- Had a shop do this one for me. I've been trying to suck it up and learn how to install mods myself but didn't want to take the risk on my daily driver.
- Special thanks to @razorlab for all the data he's shared on this manifold. Gave me the confidence to purchase it. I plan on taking the car to the track this year and learning for the first time.
- Some Verus pieces
- AOS
- Brake Master Cylinder Brace
- Cap Set
- Turbo Heat Shield
Yep, that came with the HKS intake. I read on Verus' site that it didn't work with the HKS heat shield so I was worried I'd have to take it off. I'm guessing the heat shield that comes with the closed box version sticks out way further due to the size?What heat shield did you use with the intake? Is that the one that came with the hks intake? I wanted the verus aos but couldn't fit it.
Oh that might be why. Thanks.Yep, that came with the HKS intake. I read on Verus' site that it didn't work with the HKS heat shield so I was worried I'd have to take it off. I'm guessing the heat shield that comes with the closed box version sticks out way further due to the size?
I'll let you know on Monday when the owner is back in town.Oh man, I'm so sorry. Are they at least going to fix it all?