Supra Development Thread - OEM+ Designs

[_Sp1ral0ut]

should be ready before the end of the year.

Two weeks - gotcha.

Sponsored

 

[Scoopra]

Finally snagged some matte hood vents when they were available. Quality is good, fitment is OK - no matter how I installed them, moved them around, etc, they seem to have these gaps that look off. Drivers side (shown below) is maybe worse, but both are noticeable some distance out. Any suggestions? Others have the same issue? I’m usually not too nit picky, but these things are eye-wateringly expensive for a non-functional appearance accessory so I feel the right to be picky. I’ll also accept ‘STFU’ as a response and will avoid looking at them. ?

Mine fit the same way. Only got worse when I tried to reposition them.

 

[Vertex]

Two weeks - gotcha.

You need to ™ that

 

[Davo307]

Finally snagged some matte hood vents when they were available. Quality is good, fitment is OK - no matter how I installed them, moved them around, etc, they seem to have these gaps that look off. Drivers side (shown below) is maybe worse, but both are noticeable some distance out. Any suggestions? Others have the same issue? I’m usually not too nit picky, but these things are eye-wateringly expensive for a non-functional appearance accessory so I feel the right to be picky. I’ll also accept ‘STFU’ as a response and will avoid looking at them. ?

I had the same issue with mine last month, but it was the passenger side. I got it as good as I could

 

[SCZ4]

I had the same issue with mine last month, but it was the passenger side. I got it as good as I could

Same, just the one side oddly. Bothered me for a few days, don't notice now.

 

[Loco38SUP]

Exhaust tips?

Agree, any updates?

-RJM

 

[stormgreysupra]

Agree, any updates?

-RJM

they are in production

 

[stormgreysupra]

A first look at the door vent samples. They are noticeably longer, wider, and not as sunken in as the factory ones.

The mesh design is also a lot cleaner and more detailed, but we still need to make them deeper for a more realistic look.

 

[cpunlamd]

I just picked up the complete 8pc ground effects. Best looking lip kit out there IMO! When are you guys coming out with a rear trunk spoiler?

 

[stormgreysupra]

I just picked up the complete 8pc ground effects. Best looking lip kit out there IMO! When are you guys coming out with a rear trunk spoiler?

we will be starting the design process next month, but we already have an idea what it will be like.

 

[J29DB03]

we will be starting the design process next month, but we already have an idea what it will be like.

A small, little lip spoiler similar to what comes on the new 911 S/T would be perfect.

 

[i3igpete]

Would be nice if you were able to quickly develop front tire spats that had the proper holes and spacers. Otherwise I will probably piece together my own using the racebred universal kit.

https://racebredcomponents.com/products/racebred-components-universal-front-tire-spats

 

[cpunlamd]

Most aftermarket offerings are bulky looking. Can you possible make something similar to the Maxton wing? Much thinner and sleek looking.

 

[Gabe]

Would be nice if you were able to quickly develop front tire spats that had the proper holes and spacers. Otherwise I will probably piece together my own using the racebred universal kit.

https://racebredcomponents.com/products/racebred-components-universal-front-tire-spats

Those look nice. I’m going with the Verus ones. They look really good quality. I will install them today and share pics.

My only modification to them is that I will secure them to the bumper with M2 screws/washer and nuts instead of using only the tape. I’m afraid they will fly away and hit someone on the track or the street.

 

[i3igpete]

Those look nice. I’m going with the Verus ones. They look really good quality. I will install them today and share pics.

My only modification to them is that I will secure them to the bumper with M2 screws/washer and nuts instead of using only the tape. I’m afraid they will fly away and hit someone on the track or the street.

huh, didn't even notice that their splitter endplates had a tire dam built in

Sponsored