What did you do to your Supra today?

[Davo307]

Installed H&R springs and full reflector delete kit. Looks great with the 15mm spacers too.

 

[Habu]

Oil change. Decided to install a oil billet cap. No need to transfer the oem bypass valve as the new one comes with one. Tried actuating it by hand by was unable to. Not sure why the oil has some form of separation marks in it.

 

[Bug2th]

Oil change. Decided to install an oil billet cap. No need to transfer the oem bypass valve as the new one comes with one. Tried actuating it by hand by was unable to. Not sure why the oil has some form of separation marks in

Shoot. Thought that was the brains of the car

 

[5150.MKV]

Installed H&R springs and full reflector delete kit. Looks great with the 15mm spacers too.

Heard the reflectors are a pain in the ass to pry off but really want to do the same to my Absolute Zero. How was your experience any issues / tips?

 

[i3igpete]

Shoot. Thought that was the brains of the car

NGL this is kind of unsettling to look at

 

[Syeeee]

Shoot. Thought that was the brains of the car

Looks like a zoomed up shot of a scrotum

 

[Davo307]

Heard the reflectors are a pain in the ass to pry off but really want to do the same to my Absolute Zero. How was your experience any issues / tips?

You've heard correct lol. Make sure you have a heat gun. I took the extra 10 minutes and removed each fender cover so I could pop off the sides of the front bumper so I could access the backside. If you want any more tips feel free to DM me!

 

[Habu]

NGL this is kind of unsettling to look at

I’m thinking moisture

 

[FuzzyRev]

Looks like a zoomed up shot of a scrotum

You would think that.

Seriously, looks like some kind of other fluid residue was in the drain pan prior to oil joining the hot tub party

 

[Habu]

You would think that.

Seriously, looks like some kind of other fluid residue was in the drain pan prior to oil joining the hot tub party

I did add ceratec

 

[razorlab]

I did add ceratec

That's why. My oil looked the same after I installed my Pure 700 and packed the turbo cartridge with break in oil.

 

[djmad]

Removed a seat rail bolt to verify its size to install my new seat. Can’t get this Recaro podium slider to stay in place without applying pressure to the center actuator. Once pressed down (lifted up) it just pops out?.

 

[FLtrackdays]

Removed a seat rail bolt to verify its size to install my new seat. Can’t get this Recaro podium slider to stay in place without applying pressure to the center actuator. Once pressed down (lifted up) it just pops out?.

That‘s sucks! Call them. They should be able to help figure it out.

I just ordered (yesterday) the one racebuild and Bryan said would work/fit (on another thread):

https://milkymotorsports.com/products/pci-slider-seat-mount-bmw-3-series-2007-2013-driver-side

Fantastic company. Called me to ask if I really wanted the passenger side (whoops!! I did not. So they switched the order). Along with a seat, harness, and other goodies to finally drive this Supra properly on track..

Also wanted to replace the caliper bolts, since I change the pads & rotors way more often than designed for. Bought these suckers that were recommended on my previous track cars. Figured it couldn’t hurt

https://www.sixityauto.com/2-pc-car...for-2021-2022-toyota-gr-supra-fvh5kv0pje.html

 

[razorlab]

Also wanted to replace the caliper bolts, since I change the pads way more often than designed for. Bought these suckers that were recommended on my previous track cars. Figured it couldn’t hurt

https://www.sixityauto.com/2-pc-car...for-2021-2022-toyota-gr-supra-fvh5kv0pje.html

Why are you taking off the caliper bolts to change the brake pads?

Also, OEM caliper bolts are cheaper. BMW #34106864424

 

[John8]

Posting seems to have really taken a dive on all threads here.