Supra Development Thread - OEM+ Designs

[Gabe]

huh, didn't even notice that their splitter endplates had a tire dam built in

You mean this?
Yeah. That piece is full CF and has those little dots to better redirect flow across the wheel. (They tested on CFD, not an actual wind tunnel - but is the closet to actual aerodynamic data we got)

Sponsored

 

[i3igpete]

No not the spliter ramp, though I'm debating on whether I should bite the bullet on that. It can introduce flexibility issues as well as kick you out of a lot of classes that dictate a flat splitter.

https://occamsracers.com/2023/12/31/the-dumbest-aero-rules-splitter-rules/

I was referring to this

that being said, mediocre cfd is still probably better than bad tunnel data (i.e. trying to do study wheelwell effects with a static wheel tunnel)

 

[Gabe]

No not the spliter ramp, though I'm debating on whether I should bite the bullet on that. It can introduce flexibility issues as well as kick you out of a lot of classes that dictate a flat splitter.

https://occamsracers.com/2023/12/31/the-dumbest-aero-rules-splitter-rules/

I was referring to this

that being said, mediocre cfd is still probably better than bad tunnel data (i.e. trying to do study wheelwell effects with a static wheel tunnel)

I gotta say the truth. Out of all Verus’ stuff, the piece I was less impressed with was that endplate.

Is 3D printed plastic.
Bolts on the splitter via 3 screws. The screws are a pain to install because the nut strips the plastic in the 3rd turn.

At the end I was able to bolt it in place but at the current price I think just way too much for what it really is. Is not a +$200 piece.
I will call them and be sure they hear it.

 

[stormgreysupra]

Most aftermarket offerings are bulky looking. Can you possible make something similar to the Maxton wing? Much thinner and sleek looking.

We are planning a standing spoiler not a duckbill

 

[stormgreysupra]

We are excited to announce the release of our brand new supra honeycomb mesh design open front vents.

https://www.oemplusdesigns.com/products/open-front-vents-toyota-gr-supra-a90-91

We updated the edges compared to the previous design so that the paint behind the vents are covered for a cleaner look.

There is also a Pre-Black Friday Sale going on currently, so you will automatically receive 20% off at the checkout.

 

[stormgreysupra]

Our Black Friday Sale is Now Live!

-20% OFF on most products! Discount applied at checkout.

www.oemplusdesigns.com

 

[stormgreysupra]

We are excited to the announce the release of our Replacement Headlight Lens.

https://www.oemplusdesigns.com/products/replacement-headlight-lens-for-gr-supra-a90-91

It’s the perfect solution to repair your cracked, scratches, and rock chipped headlights without having to replace the entire assembly.

 

[zackarybyrd]

I see now. We will not be making these since we already have open ones. For the door vents we are working on a complete replacement door garnish however that will get rid of the fake vents.

did this product ever get developed? Is there any aero data or CFD looking at drag from the stock door garnish versus a design to potentially improve flow around the car? Truthfully I don’t even know if the stock design leads to any flow disruption but I can see how it might.

 

[stormgreysupra]

did this product ever get developed? Is there any aero data or CFD looking at drag from the stock door garnish versus a design to potentially improve flow around the car? Truthfully I don’t even know if the stock design leads to any flow disruption but I can see how it might.

We are working on a door vent cover instead. A replacement door garnish makes no sense cost wise since it won’t be functional.

 

[stormgreysupra]

Here is a look at a new front splitter design/ lip design we have been working on.

https://www.oemplusdesigns.com/products/front-splitter-for-gr-supra-a90-91?variant=45519443230954

 

[Eastwood]

That’s pretty clean.

 

[Bigboss]

When the center caps shipping tho

 

[stormgreysupra]

When the center caps shipping tho

Within 1 week

 

[stormgreysupra]

First sample of the cup holder covers next to the original ones from Toyota.

Our version will feature a matching material to the factory armrest for a cleaner and more seamless design.

 

[lucky phil]

First sample of the cup holder covers next to the original ones from Toyota.

Our version will feature a matching material to the factory armrest for a cleaner and more seamless design.

Will it maintain the armrest profile ot just be flat on the top?
Phil

Sponsored