“Nice” way to mount JB4?

[YOTA_IL]

That was how I did mine before I redid it and added black zip ties. I did what Zack is suggesting to you.

Sponsored

 

[TYMBOM]

That was how I did mine before I redid it and added black zip ties. I did what Zack is suggesting to you.

Yes, I am also the same currently. I may spend some time and see what I can come up with. I was just trying to copy someone else’s homework.

 

[Kmj442]

I’m currently in the market to get one and was thinking about this. If I do go this route I’m going to try and 3d print something for it. I’ll let you guys know if I come up with any good options but really need to install one to see what reasonable options are.

 

[Kmj442]

Ordered one - should be here early next week so I can start looking at this. If people are interested in what I find, I'll upload the STL file/s and see we can do with it.

 

[R_R8TED]

Just left in the cubby above brake fluid. It did fine for 15-20 track days before I went ecutek
No need to mount unless it just bothers u

Same here.

 

[puzzled]

I took an aluminum Ikea door handle for wardrobe to make a little bracket. The JB4 and wireless module is zip tied to the bracket. There is a bolt sticking out from side of the engine bay so used that to secure the bracket. My unit is secure, no play.

 

[zrk]

My unit is secure,

?

no play

?

 

[TYMBOM]

I took an aluminum Ikea door handle for wardrobe to make a little bracket. The JB4 and wireless module is zip tied to the bracket. There is a bolt sticking out from side of the engine bay so used that to secure the bracket. My unit is secure, no play.

Finally something! Lol, thank you.

 

[puzzled]

Finally something! Lol, thank you.

Okay now I'm not sure whether you're being sarcastic or true.. ?



example: 400Z looks like an anus = not sarcastic, just a fact.

 

[TYMBOM]

Okay now I'm not sure whether you're being sarcastic or true.. ?



example: 400Z looks like an anus = not sarcastic, just a fact.

Not sarcastic at all. It’s the first one that was different from all the rest of us. Not ideal yet but progress to what I’m thinking.

 

[puzzled]

Please halp!

me: Here, grab the rope! I’ll help ya!

Not ideal, I want a golden carriage!

 

[Mike_Honcho]

i I have the JB4 Velcroed to the wall infront of the brake booster with the wireless phone connection module zip tied to the JB4 unit itself.

This is the Velcro tape I used I got it on Amazon BTW.

 

[Skidsareforkids]

When I finally get mine I’m planning on using avionics bracketry to hard mount somewhere

 

[BradenSchlimme]

Does anyone have the STL or cad file for the 3d printed jb4 mount?

 

[i3igpete]

i used the double wide bracket suggested here and used the grounding stud. will need to hog out the hole a tiny bit with a drill. orient the bracket at a slight downward angle (about 20 degrees) and you should be able to mount the jb4 without making contact with the firewall or the rain cover.

Rather than velcro, I used 3M dual lock tape. The same stuff that comes with your Tollway I-pass/E-ZPass. Use an extra long strip on the jb4 itself so you can adjust it either way. And then a pair of zip ties in an X configuration to make it extra secure once you're happy with the position.

parts list:
https://www.homedepot.com/p/Everbil...Corner-Brace-2-Piece-per-Pack-20744/205338336

https://www.amazon.com/3M-Reclosable-Fastener-SJ3560-Clear/dp/B00JHKTDMA

Sponsored