swrdply400mrelay
Well-Known Member
What exhaust do you have?
Sponsored
Sponsored
Dinan Intakes for the Toyota GR Supra
- Thread starter Dinan_Engineering
- Start date
- Watchers 19
Basil_a
Member
- First Name
- Basil
- Joined
- May 6, 2024
- Threads
- 0
- Messages
- 8
- Reaction score
- 23
- Location
- Orlando, FL
- Car(s)
- 2023 Supra MT
AWE Touring Resonated - stock DP
Funkjaw
Well-Known Member
Does anyone have any more sound clips of this intake? Or any further feedback on noise/IATs/heatsoak/dynos, etc? Saw this person's review and am trying to gauge how accurate it is....
i3igpete
Well-Known Member
the intake is very quiet, i have a titan exhaust and i can pretty much only hear it in comfort when the valve is closed. so a very narrow criteria of building boost AND below 3500 rpm.
in terms of temp, IAT fluctuates between 10 and 30 degF above ambient when cruising around town and highway on minimal boost. I am running the bimmernetwork heat shield.
On track, the IAT range is much tighter, bounces between 40 to 50 degrees above ambient. but the bigger factor is your Boost pressure (i disable the jb4 for now) and intake manifold (stock).
in terms of temp, IAT fluctuates between 10 and 30 degF above ambient when cruising around town and highway on minimal boost. I am running the bimmernetwork heat shield.
On track, the IAT range is much tighter, bounces between 40 to 50 degrees above ambient. but the bigger factor is your Boost pressure (i disable the jb4 for now) and intake manifold (stock).
jj1010
Active Member
@Dinan_Engineering Sorry to revive an old thread but I just installed my dinan CAI. I noticed the intake duct is not lining up with dinan carbon fiber intake duct for my supra. Is this a design flaw or part of the original design? There is open space betwen the intace duct and the bottom hole of the intake duct on the CAI.
Sponsored
