IND A90 Supra Start / Stop Button DIY

[yfeghhi]

Doesnt sound right, mine functions exactly as stock did

Yea must have had the prongs wrong or something. Took it off and got it on right now

Sponsored

 

[AndyMy]

So is there any benefit to buying IND Style's red button (almost $60 shipped) as opposed to this one on Amazon for $10 considering they seem to be identical products?

Same one

 

[kissmyrs]

Just finished

Looks great!

 

[Meanie]

Couldn't get my stock button off with claybar. What kind did you guys use?

edit:
Never mind, used standard gray detailing clay instead of blue soft windshield clay and it extracted the stock button with no issues

 

[Supraboi7]

This will be arriving tonight, fingers crossed it’ll be tacky enough

 

[Supraboi7]

Another satisfied customer

 

[Down167]

Another satisfied customer

was pulling the button out easy with that clay? did you do anything special to get it out?

 

[Supraboi7]

was pulling the button out easy with that clay? did you do anything special to get it out?

Yeah i rolled it into a cylinder shape so it was only touching the button when i squished it (not the bezel) and pushed firmly and held for like 5 seconds then quickly yanked it out. New one pops right in!

 

[tadda]

Just received red start button from Amazon...Here is the difference compared to OE as seen from back side...

I noticed there are 3 guides on OE button and I'm not seeing them on red button...Anyone who purchase from Amazon find this to be an issue?

OE Start Button (below):

Red Start Button from Amazon (below):

 

[tadda]

And yeah....the putty they include to remove the button is useless...

 

[AndyMy]

And yeah....the putty they include to remove the button is useless...

Took me 5 sec

 

[Meanie]

Keep folding the clay over and over until it gets tackier then try. You also have to pull it off pretty quickly or just the putty will detach.

 

[tadda]

Took me 5 sec

You used a clay bar correct? not the soft putty that was included with button

 

[tadda]

Keep folding the clay over and over until it gets tackier then try. You also have to pull it off pretty quickly or just the putty will detach.

You used a clay bar correct? not the soft putty that was included with button

 

[Meanie]

You used a clay bar correct? not the soft putty that was included with button

I got the Amazon version, not the IND one with the putty so I had to use a regular clay bar.

Sponsored