3D Print Options for the Supra

[BrodoFratgins]

Hey everyone, I wanted to start a thread on 3D printable parts, accessories, etc for the Supra. I've seen mention of various parts across the forum, but no consolidated list of anything people stumble across or create. This could also be a good place to dump ideas where people who are more skilled in 3D design could possibly create something useful to the community.

Here are some prints I've created or stumbled across:

1. Baofeng Radio Mount: https://www.printables.com/model/1111964-gr-supra-radio-mount
   1. I designed this using another very useful design (2) as a way to hold my radio when I make trips to the Tail of the Dragon
2. Magsafe Mount: https://www.printables.com/model/771395-toyota-gr-supra-mkv-magsafe-phone-mount
   1. Very unique and convenient way to mount a phone in the Supra. I used part of this design for my Radio Mount.
3. Speaker Mod Ports: https://www.printables.com/model/796936-toyota-supra-mk5-subwoofer-ports/files
   1. If you're doing or plan to do the Speaker Mod for the Supra you can buy speaker ports and mesh or you can use this file to make them yourself and save a bit of money and time.

Sponsored

 

[rwense]

I have a whole host of 3d printed parts for the A90, some I haven't really posted about but for now, here is my fender vent:

https://cults3d.com/en/3d-model/gad...Qsy1qCwLRT4IYsZ_Adae_P3BSsGsMuvCApB5NKQ4BaNCm

It's survived a whole season of tracking and 3 other cars are running this version as well as 2 others with my prior version. As a bit of a teaser, I'm working in a carbon fiber version with a friend of mine that shouldn't be astronomically expensive as say Spage......and won't take 2 years to get to you. Here's a sneak peak at the plug

 

[bushido]

y'all wanna be on santa's list sooooo bad

 

[rwense]

Figured I'd share some other 3d printed forays:

Front Spats
-these interact with the stock lip + the Aeroluxe GT4 lip

Rear spats (Aimgain style)
-These were the first thing I printed for my car. I haven't uploaded the files to Cults but I suppose I could do that if there is enough interest

Phone/tablet mount
-This part is similar to the proclip mount but not $50 for a piece of plastic. This is NOT my design but I can find it with a bit of looking if there is interest

Jack stand adapters
-these are also NOT my design and were designed for essentially all BMWs with the rectangular jacking point. They are 100% solid PETG and I've used the same set on my car for almost 3 years at this point. Again, I can do some digging and find the files if there is interest

 

[Rensuhlo]

.

 

[BrodoFratgins]

Rear spats (Aimgain style)
-These were the first thing I printed for my car. I haven't uploaded the files to Cults but I suppose I could do that if there is enough interest

I'm definitely interested if/when you have the time to upload!

 

[rotary heart]

Rear spats (Aimgain style)
-These were the first thing I printed for my car. I haven't uploaded the files to Cults but I suppose I could do that if there is enough interest

I'm interested on this files too. Have been thinking of making this exact same thing for mine

 

[afkdoorbell]

Dam this thread rocks. I'm interested!

 

[Eastwood]

Can you try 3D printing the base trim of the shifter boot for MT?

If you want to use a new shift boot and knob, you have to remove the plastic trim piece at the bottom. It would be cool to have one to buy to keep the OEM boot and knob together.

 

[rwense]

Can you try 3D printing the base trim of the shifter boot for MT?

If you want to use a new shift boot and knob, you have to remove the plastic trim piece at the bottom. It would be cool to have one to buy to keep the OEM boot and knob together.

Most likely yes, if you have some pics and whatnot I can take a look at it. I don't have access to a manual supra unfortunately so if someone can provide a scan that would be very helpful.

 

[RyanA90]

Ooh I would love a 52mm mount for my boost gauge to the center infotainment screen just to hide the wires. I know pod wurx makes one for $400 but I don't need a whole rear cover replacement, just something to double side stick and go over the wires.

 

[Eastwood]

Most likely yes, if you have some pics and whatnot I can take a look at it. I don't have access to a manual supra unfortunately so if someone can provide a scan that would be very helpful.

This is from @UYCR, he was trying to print some but had difficulty with the shape.

Wish I could scan mine for you. Just bought a new shift boot so I'll be removing that trim piece soon to put it on the new boot.

 

[Gabe]

Phone/tablet mount
-This part is similar to the proclip mount but not $50 for a piece of plastic. This is NOT my design but I can find it with a bit of looking if there is interest

interested in seeing this.

 

[garudathree]

a bunch of track parts here:
https://cults3d.com/en/users/aerodynemesis/3d-models

 

[Rensuhlo]

a bunch of track parts here:
https://cults3d.com/en/users/aerodynemesis/3d-models

Shameless plug.

Sponsored