John8
Well-Known Member
I would agree. It is easy to tap, just pay attention and view a Youtube. I have used tap and dies for years and they can come is so very, very handy! I am using a bolt on my 2020 but tapping makes much more sense and you don't have to worry about a nut freezing on there, causing a pain, though I do use some non freeze goop normally but used stainless in this case, so don't have to worry about it. but tapping is the way to go and don't know why they didn't do it at the factory.After having to remove the brace for other engine upgrades, I’ll be tapping these holes. Such a pain to blindly find the bolt to engage the nut
Sponsored