kingdooksdb
Well-Known Member
Any updates with regards to aftermarket clutch?
Sponsored
I don't think ACT has released any info yet or at least I haven't seen anything. We might just have to wait a bit more while TJ Hunt tests out their prototype clutch.Any updates with regards to aftermarket clutch?
Under your scenario If I were you the first thing I would do is check the clutch fluid level. Fluid level too high, no room for hot clutch fluid to expand. The reservoir then pressurises and the clutch doesn't fully engage after releasing the pedal. Clutch slips and then it's a compounding effect until it burns out unless you are aware of what's happening.Confirming the clutch slip in A91MT coming for the Middle East region.
Took my car to the first track day after a month of owning it with 3000km on the clock.
During the out-lap and first hot lap, the car was acting normally and the clutch was kicking just fine. after 3rd and 4th hot lap started to feel the clutch slip and not come back as quickly as it should normally.
After reading and checking with friends, it is the same issue everyone is facing. and you need to fix by removing the clutch delay valve
I did not see any video for Supra so far doing it and seems ACT are doing a clutch upgrade soon
Phil to the rescue again. The man is an automotive savantUnder your scenario If I were you the first thing I would do is check the clutch fluid level. Fluid level too high, no room for hot clutch fluid to expand. The reservoir then pressurises and the clutch doesn't fully engage after releasing the pedal. Clutch slips and then it's a compounding effect until it burns out unless you are aware of what's happening.
Phil
Also curious to know if yall broke in the clutch or just went WOT from day 1These clutch issues are starting to scare me...
For the people who aren't having clutch issues, how hard do you drive the car? Track days? Spirited pulls every now and then?
Nobody will truly know, is all he say she say. There probably 1000 MT in the wild, we got like what 10 people (maybe) saying their sliping, half don’t know what sliping actually is or driven a BMW manual before. This is very similar to when the g80 manual first came out and a few threw out their clutch, but most are doing just fine. I have a friend who also tore down a MT stating the transmission itself is stronger than the ATs but again this is one of those “I have a friend stories” take what you will with a grain of salt. Remove your CDV, drive it how you like it, or just stop coming back here and sell your car for a 4Runner and be happy ?Also curious to know if yall broke in the clutch or just went WOT from day 1
I would certainly hope nobody skipped a proper clutch break-in.Also curious to know if yall broke in the clutch or just went WOT from day 1
@Stvee @NitroYellowMKV @Sharocks @UYCR @FLtrackdays
Success! I just placed an order with TMNA for the slave cylinder and the metal line that connects to it. Will get an ETA tomorrow..
Update: ETD/ETA currently points to the end of April at the earliestKeep us updated !
Under your scenario If I were you the first thing I would do is check the clutch fluid level. Fluid level too high, no room for hot clutch fluid to expand. The reservoir then pressurises and the clutch doesn't fully engage after releasing the pedal. Clutch slips and then it's a compounding effect until it burns out unless you are aware of what's happening.
Phil