SupraMKV2.0
Well-Known Member
- First Name
- Michael
- Joined
- Jan 5, 2021
- Threads
- 28
- Messages
- 663
- Reaction score
- 987
- Location
- Wisconsin
- Website
- twinskrulldesign.com
- Car(s)
- 2023 M550i, 2023 M340i, 2021 Supra
- Thread starter
- #1
Coded Sport+ into the Supra over lunch.
What is Needed and How To:
Coding Sport Plus is a two step coding process. It's the same on the 2.0 as it is in the 3.0 version.
PART ONE:
PART TWO:
ENJOY!
What is Needed and How To:
- OBDLink CX Module
- BimmerCode (iOS or Android)
Coding Sport Plus is a two step coding process. It's the same on the 2.0 as it is in the 3.0 version.
PART ONE:
- Get into your Supra and hit the start button three times quickly with foot OFF the brake to activate the vehicle's diagnostic function.
- Place the OBDLink CX module into the OBDII port and connect to the BimmerCode application using your phone via Bluetooth.
- Choose BMW Z4 as the vehicle model.
- Choose Body Domain Controller
- Press Expert Mode in bottom left hand corner of app.
- Scroll down and choose 3221 PfFesMaster
- Scroll down and choose FesSportWorldMode1
- Activate Sport Expert
- Back out of menus and press CODE in the top right hand corner of app. BimmerCode is now writing in the Sport+ data to your ECM and will take a few minutes to finish.
PART TWO:
- While staying in the Z4 menu, scroll down and press Headunit.
- Again, press Expert Mode in bottom left hand corner of app.
- Scroll down and press 3008FES
- Press FES_Sport_Expert
- Press Aktiv
- Back out of menus and press CODE in the top right hand corner of app. BimmerCode is now writing in the Sport+ menu data to your ECM / headunit and will take a few minutes to finish.
- Once data is complete, disconnect the OBDLink module and start the vehicle.
- You can now go into your Sport Individual screen and choose Sport Plus in Engine and Transmission.
ENJOY!
Sponsored
Last edited: