NEW: bootmod3 WiFi ENET CANBUS Flash Adapter

[protuningfreaks]

Introducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all new bootmod3 Wireless Adapter

bootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.

Features:
- Fastest flash times over ENET and CANBUS
- Reliable and consistent connectivity
- Wireless ENET support for BMW F and G series vehicles and 2020+ Toyota Supra
- Wireless CANBUS Support
- Unlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing need for additional WiFi adapters or DCAN cables
- V3 Version ONLY - NO ALARMS if left plugged in (BMW G series vehicles and Toyota Supra)
- Enters ultra low power mode if left plugged in consuming just ~20mA
- OTA updates through the new bootmod3 app
- Firmware fully extensible for additional flash and diagnostic protocols for future connectivity support
- V2A version of the adapter will trigger alarm on G series vehicles and 2020+ Toyota Supra. It is a lower cost option for those that don't mind unplugging their adapter after use
- Manual Toggle switch to fully power down adapter
- Small form factor, considerably smaller than generic WiFi ENET adapters
- No VIN locking, can be used on multiple vehicles

Vehicles supported:
- All BMW F and G series vehicles
- 2020+ Toyota Supra (A90 A91)

Additional 3rd Party applications supported:
- ISTA / ESYS
- xHP / xDelete
- Bimmercode / Bimmerlink
...and other apps requiring ENET support

Check out our YouTube channel showing the new bm3 WiFi adapter, various ways to connect with your vehicle and a sneak peak of the brand new bm3 app

Sponsored

 

[dethred]

Awesome, now figure out stateside unlocks so more people can use this.

 

[Eastwood]

Ordered one for Bimmercode app! Can't wait to get it.

Patiently waiting for an Unlock option in the US.

 

[Eastwood]

So I bought this, got it connected and worked perfect the first time.

Lately after I save, it always disconnects from the wifi and I have to reconnect if I want to code another setting. Is this normal? It's become pretty annoying.

 

[7sstreet]

So I bought this, got it connected and worked perfect the first time.

Lately after I save, it always disconnects from the wifi and I have to reconnect if I want to code another setting. Is this normal? It's become pretty annoying.

You don’t have your settings right as mine is rock solid. Check these instructions:

https://www.protuningfreaks.com/blogs/news/connectivity-with-bootmod3

 

[zrk]

So I bought this, got it connected and worked perfect the first time.

Lately after I save, it always disconnects from the wifi and I have to reconnect if I want to code another setting. Is this normal? It's become pretty annoying.

Yeah- disconnect from your house wifi. 'Forget Network'

 

[razorlab]

Adapter works well but for some reason, my alarm still goes off if I leave it plugged in, even though they said it wouldn't. Not a big deal, just thought it was funny that was one of the pros it was supposed to have.

 

[7sstreet]

Then you probably got a V2, the cheaper kind. Its never turned on for me. You can code that crap off with bimmercode too if you have some weird thing going on.

 

[razorlab]

Then you probably got a V2, the cheaper kind. Its never turned on for me. You can code that crap off with bimmercode too if you have some weird thing going on.

You mean V3. V2 is the cheaper version. I bought the V3.

 

[Delta1Seven]

Awesome, now figure out stateside unlocks so more people can use this.

Agreed. Stateside unlocks will only help further this platform and make it even more accessible to more people, which is only a good thing...

 

[ArmenLS1]

I'm having some connection issues with the new V3 dongle. I've followed the instructions for static connection and able to connect to the wifi dongle. I'm using it with my Note 10 Android phone. When I load the app I can't seem to get any sort of connection with the car. Does the car need to be in diagnostic mode or 1 click?

 

[razorlab]

I'm having some connection issues with the new V3 dongle. I've followed the instructions for static connection and able to connect to the wifi dongle. I'm using it with my Note 10 Android phone. When I load the app I can't seem to get any sort of connection with the car. Does the car need to be in diagnostic mode or 1 click?

Engine running or diagnostic mode

 

[ArmenLS1]

Cool. I reached out to them directly. Doesn't seem to work at all. It really shouldn't be this challenging to connect to a wifi dongle.

 

[XtremeMaC]

Cool. I reached out to them directly. Doesn't seem to work at all. It really shouldn't be this challenging to connect to a wifi dongle.

Yeah- disconnect from your house wifi. 'Forget Network'

 

[jtsang25]

Bluetooth should be off. I've had not issues connecting.

Sponsored