BA9092
Well-Known Member
- First Name
- Christian
- Joined
- Aug 1, 2020
- Threads
- 80
- Messages
- 1,213
- Reaction score
- 1,649
- Location
- Dallas/Fort Worth
- Car(s)
- 2020 GR Supra Absolute Zero Premium
The specific kit from Bimmertech is the NBT EVO ID6 head unit option with touchscreen. Also, make sure you order the automatic transmission model.I need this. Care to share some more details please!
They send two different remote wires along with the kit that I didn't use as the MENU button on our iDrive is what controls the front camera.
I installed the MMI behind the OEM head unit. It's a very tight fit, but there is room when pushed in all the way and vertically to the back. You can tuck all the wires to either side of the console interior. Just take your time and be careful.
The wiring for the front camera itself can just be routed above the driver footwell panel and up through that firewall grommet that everyone uses for the JB4 install.
I had to Dremel out about 2mm of the front grill to fit the camera flush. It's much easier to take the front bumper off to mount and route the wire, but I didn't want to deal with bumper alignment issues as I already did that once in the past and had a couple hours worth of OCD alignment woes.