Achieving 750WHP+ Without Port Injection - A Plug and Play Solution for 2020+ Supras

[KBGT]

I don't think there is a OEM fuel pressure sensor pre HPFP. I believe it is inferred and doesn't tell you anything.

Damn, now I have even less trust in logged variables that remain at a steady value. I guess this may be a reason to put a pressure sensor on the low pressure side via reflex analog input.

Sponsored

 

[Evolution]

I don't think there is a OEM fuel pressure sensor pre HPFP. I believe it is inferred and doesn't tell you anything.

Thats pretty stupid. How the heck are you supposed to know when the LPFP is at its limit then? Put a gauge on the dash for it?

When we have cars come in for a dyno and they dont have the ability to log fuel psi though the ecu, we at least hook up a sensor so we can log it on the dynos computer.

 

[razorlab]

Thats pretty stupid. How the heck are you supposed to know when the LPFP is at its limit then? Put a gauge on the dash for it?

When we have cars come in for a dyno and they dont have the ability to log fuel psi though the ecu, we at least hook up a sensor so we can log it on the dynos computer.

That is one of the big reasons the PI guys get a fuel pressure sensor inline.

 

[Evolution]

That is one of the big reasons the PI guys get a fuel pressure sensor inline.

Well ya they can plumb it into the Reflex and log it. What do us full DI guys do? Hope and dream the pump is keeping up? I mean, even on your setup, I would be worried that I would be near the limit of the stock pump.

 

[razorlab]

Well ya they can plumb it into the Reflex and log it. What do us full DI guys do? Hope and dream the pump is keeping up? I mean, even on your setup, I would be worried that I would be near the limit of the stock pump.

well, I am adding like 6 sensors this winter so I will let you know.

 

[Evolution]

well, I am adding like 6 sensors this winter so I will let you know.

Is there some sort of CAN expander available?

 

[razorlab]

Is there some sort of CAN expander available?

I have the full Racecapture setup in the car. I've had it since last season, I've just rarely been using it since I've been logging with BM3.

The new BM3 CAN expansion board will also support external sensors. Who knows what the price will be though.

 

[zrk]

What do us full DI guys do?

Add PI and be done with it ?

 

[Evolution]

Add PI and be done with it ?

Nah, I don't need it. I'll wait and see what pops up for a can expander.

 

[Thraxbert]

 

[Jesse DaBears]

A small update ! I just received all the parts I need to install them and dyno the car ! I am excited to get results in direct injection no need for controllers or any of the sorts will have runner adjust according to changes and see what happens

ughhhhhhh bruh how you going to do a chargeback for all these parts. Thats fd up man.

 

[Awad]

Never did we discuss the time taken for the refund but what qualifies it and then I got proceeded to be attacked on the car and the work done and him asking me to post numbers which are not realistic or doable without making the car blow up and he specifically said “ blow it up if you have to “ as long as we get better numbers so people can see

 

[Jesse DaBears]

The story is not the simple we had an agreement , and now we are in a situation where he didn’t want to fulfill that below I leave the evidence . I posted on our 250K follower page provided data and been updating everything and kept my end of the deal .

I mean you provided very little data with a poor tune. Why is that Spools fault? Let see the full email chain not just a bits and pieces.

 

[Awad]

I mean you provided very little data with a poor tune. Why is that Spools fault? Let see the full email chain not just a bits and pieces.

 

[Jesse DaBears]

"We will fully refund the order once our team sees that you are marketing and promoting the product as intended" Having a shit tune that crashes the HPFP is not promoting it and marketing as intended.

Sponsored