Poor man’s SPLKind of amazed how much a carbon copy the Torque Solution parts are compared to SPL.
How are these DRLs holding up, any issues? I was looking to order these but couldn't find any long term reviewsThese came in today all the way from china too!!
![]()
![]()
![]()
![]()
Install was easy just a bunch of clips, bolts, and a few torx bits here and there. Honestly just time consuming lol!
I started with the driver side:
![]()
![]()
![]()
![]()
Passenger side:
![]()
Finished product, looks sooooooo goooooood!! No brightness lost at all!
![]()
![]()
![]()
![]()
![]()
Still shining like the mid day sun!How are these DRLs holding up, any issues? I was looking to order these but couldn't find any long term reviews
any noticable effects on wheel hop?Added some traction via Megan.
Day and night difference! No more wheel hop and rear end just feels even more planted and stable at any speed. Traction bars are highly recommended!any noticable effects on wheel hop?
I'll most likely add a diff brace just so I can keep as much power on the ground. I don't plan on sending my ECU out so every little traction mod helps.nice! I was debating between this and a diff brace, was originally planning on going diff brace because I didn't want to add another degree of adjustment that could possibly go out of whack.
Did a bit of Googling and it seems like Megan is the only one that uses bushings? I'm honestly kind of leaning the same way, i don't trust myself to remember to lube spherical rod ends regularly
How difficult is the install? Simply unbolt the old one and bolt the new one in?Day and night difference! No more wheel hop and rear end just feels even more planted and stable at any speed. Traction bars are highly recommended!
Exactly, remove oem traction bar and make sure the aftermarket traction bar is the same length then install! Easy!How difficult is the install? Simply unbolt the old one and bolt the new one in?
Did you purchase the DRLs from this buyer?These came in today all the way from china too!!
![]()
![]()
![]()
![]()
Install was easy just a bunch of clips, bolts, and a few torx bits here and there. Honestly just time consuming lol!
I started with the driver side:
![]()
![]()
![]()
![]()
Passenger side:
![]()
Finished product, looks sooooooo goooooood!! No brightness lost at all!
![]()
![]()
![]()
![]()
![]()
My bad I thought I put it in my build sheet here is the link https://www.aliexpress.us/item/3256...321274724!sea!US!0&curPageLogUid=mds3FakiHXgnDid you purchase the DRLs from this buyer?
https://www.ebay.com/itm/204622110986?hash=item2fa46da10a:g:XJ8AAOSwGgRlfM19