FLtrackdays
Well-Known Member
I‘m interested too, thanks for asking. And what’s the difference between this and a motec power bleeder? @EvolutionWhich one is that? Do you happen to have a link/manufacturer?
Good point! We usually do 2 years on our non track cars. It’s cheap and the dry boiling points listed go way down (to wet) after 2 years… The track cars brake fluid get dirty as ?. So we like to bleed out the nasty stuff. Was told to do that long ago and been doing it ever since. Only takes a few brake pumps. Using clear tubes you can actually watch it push out until clear again…Brake fluid is hygroscopic, which means it absorbs water from the air. When brake fluid gets contaminated with water, its boiling point drops significantly. The recommendation is to flush the fluid every few years. More often than that if you track and need to keep the boiling point as high as possible.
Personally I just bled them last weekend because I completely replaced the fluid a few months ago and there was still some OEM fluid trapped in the ABS module at the time. After triggering ABS a few times between then and now, I had to flush it one more time to get the rest of the OEM fluid out.