What did you do to your Supra today?

[FLtrackdays]

I went out to the track today. Unfortunately mother nature decided this would be a great day to rain. It ended up like a slip-n-slide...I tried taking the traction/stability control off but it was just too much so I left it on for the day. Hopefully next time I pick a better day! I still ended up hitting 135+ on the straights though, lol

Damn I love the color! And way to go not sitting on the sidelines (with all the new Porsche guys ?)

Sounds counterintuitive but if you just one click (turn off the TC) and go slower, you’ll get a better feel of the car. That track looks great for it, lots of run off in the picture. When you go back to dry you’ll be mega faster. Learning to drive in the wet will really hone and accelerate your track skills at a much faster pace.

 

[zrk]

So much power that I decided to hit some plywood on the freeway and damage my front bumper right after the install ?. People need to secure their damn loads...

Pop it back into place + a little polish, it'll be fine.

 

[suicidaleggroll]

Sounds counterintuitive but if you just one click (turn off the TC) and go slower, you’ll get a better feel of the car. That track looks great for it, lots of run off in the picture. When you go back to dry you’ll be mega faster. Learning to drive in the wet will really hone and accelerate your track skills at a much faster pace.

Yeah that was the original plan, but as the day went on the rain got worse. I had an instructor with me, he tried driving a lap in the car with the TC off and then he immediately turned it back on and suggested I run with it enabled for the day and go back to trying without it when conditions were a bit better. Instead we just focused on braking and turn-in points, optimal lines, etc.

 

[Rta95]

Dude same lol. It was so annoying to put on and for some reason none of the hardware they gave me fit each other. Had to improvise a lot.

Do you also get rocks collected in yours lol? Like small ones?

Literally just did the same thing. Pain in the assssss getting everything to align around the dumb ass FI exhaust I have.

 

[Deighvid]

Dude same lol. It was so annoying to put on and for some reason none of the hardware they gave me fit each other. Had to improvise a lot.

Do you also get rocks collected in yours lol? Like small ones?

Damn that sounds way worse. At least my hardware fit even though I had to improvise and extend the U mounts lol.

I have up trying to make it level while on jackstands too and lining up all 3 rear sections to be level laterally was super annoying. Looks great but no idea if it's aerodynamically optimized at the angles it's at lmao

 

[M3P-A90]

Got time and installed MST Intake and turbo inlet, as others have mentioned was a bit of pain to unclip the breather hose on the turbo inlet

Turbo noises are awesome

 

[obito]

Tow hitch installed and seems really secure. Should be great for bringing tires and tools to the track. Took a little trial and error on fitment but went about as well as I hoped. I went with a CURT 19101 hitch and drilled holes in the rear impact bar to mount it. Used some threadlocker on the pass through carriage bolts to make sure the nuts stayed on.

For the 4 screws that screw the diffuser on, the outside ones needed new holes drilled so I could pull it in to the normal mounting spots as the original ones wouldn't line up due to the hitch pushing the diffuser our ever so slightly. The middle two I just screwed the heatshield back to the spot. It is very secure even without being attached there. The slight pressure from the hitch does a good job keeping it in place. The clips where the brake light previously attached also needed to be cut off on the backside for clearance.

I want to tow my motorcycle with this. Please come do this for me. Lol

 

[EvilMKV]

Finally home after our road trip up to Tennessee to take delivery of our Supra. In total, put over 1600 miles on the car, half of which was ripping it through the NC/TN mountains. Drove my truck to pick up dinner and I felt like I was driving a bus ?

 

[Traxion]

I want to tow my motorcycle with this. Please come do this for me. Lol

Pay for my flight out there to subsidize a Seattle vacation for me and I'll come do it!

 

[jchadwell]

Got time and installed MST Intake and turbo inlet, as others have mentioned was a bit of pain to unclip the breather hose on the turbo inlet

Turbo noises are awesome

Dude, have have got to paint that strut brace!

 

[Rta95]

I didn't have an issue with those mounts but I understand how you're feeling about the angles. At a certain point I was just like "F it" lol. If it works it works. If it doesn't I'll never be able to tell. ? And I already scraped the crap out of it going in to my driveway. Looks like I gotta angle even more now to get in and my car isn't even lowered lol.

Damn that sounds way worse. At least my hardware fit even though I had to improvise and extend the U mounts lol.

I have up trying to make it level while on jackstands too and lining up all 3 rear sections to be level laterally was super annoying. Looks great but no idea if it's aerodynamically optimized at the angles it's at lmao

 

[EvilMKV]

First bath to get the highway dirt off. PPF, tint and cermaic coat coming next.

 

[Blindspot]

New engine, who dis?

 

[TheangryEngineer]

Quick drive and stopped at the butchers…. Turns out the cars do have practical storage….
Nice little steak holder in the back and the dogs breakfast fits well in the cup holders

 

[BMWAF]

Installed the ubiquitous Blitz Front Strut Tower Bar (using existing bolts on my MY23 for those playing at home).