What size spacers...

[Torquem]

A lot of these look way different compared to others with the same spec spacers, even with springs. Thinking 18mm front and 20mm rear with HR springs but not sure

From an aesthetic standpoint I think it would look killer. I like aggressive offsets. Not sure if the 18mm front would rub or not. I've seen some guys complain that the 15 front rubs, others say it doesn't.

Sponsored

 

[yfeghhi]

From an aesthetic standpoint I think it would look killer. I like aggressive offsets. Not sure if the 18mm front would rub or not. I've seen some guys complain that the 15 front rubs, others say it doesn't.

Guess theres only one way to find out. Getting lug conversion kit soon and still need to get my springs installed. Going with this set up https://motorsporthardware.com/product/78mm-black-bullet-nose-race-stud-kit-14x125-14x15/ which says can take up to 20mm

 

[Torquem]

Those are same ones I'm runnin

 

[jjkoch0289]

A lot of these look way different compared to others with the same spec spacers, even with springs. Thinking 18mm front and 20mm rear with HR springs but not sure

I'm thinking the same. Would love to know what you end up doing.

 

[yfeghhi]

I'm thinking the same. Would love to know what you end up doing.

I went with 18 and 20. Ordered like 3 weeks ago from Speed Industry but its taking forever. They said it would be shipped this week that there was a delay so hopefully soon. Was waiting to get springs, stud conversion, and spacers all done at once but we will see now

 

[jjkoch0289]

I went with 18 and 20. Ordered like 3 weeks ago from Speed Industry but its taking forever. They said it would be shipped this week that there was a delay so hopefully soon. Was waiting to get springs, stud conversion, and spacers all done at once but we will see now

Waiting is no fun! Im waiting for carbon fiber mirror caps right now. Question for you... what is required for the stud conversion?

 

[yfeghhi]

Waiting is no fun! Im waiting for carbon fiber mirror caps right now. Question for you... what is required for the stud conversion?

Just the stud kit, lock tite, and some tools. Got mine direct from Motorsports Hardware with their racing nuts and locks. Says it fits up to 20mm spacer

https://motorsporthardware.com/product/78mm-black-bullet-nose-race-stud-kit-14x125-14x15/

 

[Tgiovanni]

It doesn't look like H&R offers the 46mm wheel bolts that would be needed with their 18mm spacers. Is it possible to use the 50mm?

 

[tadda]

Looking for feedback....Anyone use this spacer kit? 12mm, 15mm, 18mm

Future Classic A90 Supra 5x112 Wheel Spacer Kit

 

[king_A90]

I have the Future Classic 12mm front 15 rear, really helps the stance even at stock height. But it's not extremely aggressive.

 

[jopfer]

Looking for feedback....Anyone use this spacer kit? 12mm, 15mm, 18mm

Future Classic A90 Supra 5x112 Wheel Spacer Kit

I have the motorsports hardware stud conversion kit and went with Future classic 12 mm front/ 15 mm rear spacers. The offset of these two is perfect. I also have HKS lowering spring with 1.25" drop all the way around. No rubbing. Looks great. Hope this helps.

 

[tadda]

I'm still trying to decide between Future Classics and Burger spacer...definitely going with 12~13mm front and 15mm rear....

Burger (shown below) is currently out of stock of the 13mm and 15mm....However, the Burger spacer set will cost $120 less (includes shipping cost) than the Future Classics spacers...

Aside from the fact that the FC spacer set will cost (including shipping) $120 more than the Burger spacers my other concern with the Future Classic is that the spacer machined out sections do not appear to have a symmetrical weight distribution around the hub...Anyone experience any shaking or vibration with the Futures because of this?

I do like the idea that the Future Classic Spacer use a bolt to secure the spacer to the hub...

 

[Supraboi7]

z

 

[RichSC]

BMS 13mm spacers all around and lowered on H&R springs.

 

[tadda]

The Future Classic spacer (with 2 machined out sections shown below) doesn't appear to have a symmetrical weight distribution around the hub...Has anyone that installed the FC spacers experience any sort of shaking or vibration because of this asymmetry ?

Sponsored