Supbrah
Well-Known Member
I’ve been having a hard time getting information from these guys on my order, very quick to charge me but not so quick to provide info. I cancelled my order. Their customer service leaves a lot to be desired.
Sponsored
They fit the '21 exactly the same.I assume these fit a ‘21 as well. Anyone know otherwise?
are these screws the same thread as the OEM ones?installed my ZL1 rock guards with the hardware provided by the manufacturer. After a month or so, several of the screws holding the rear guard popped out and I lost the stand-offs. I believe the screws provided are specified as follows;
o SCREW, SHEET METAL, #8-16 X 1-1/2in, PAN HEAD, PHILLIPS, BLACK OXIDE
I was able to find similar stand-offs from the hardware store 1/2in O.D. x 3/4in. The original stand-offs were 1/2in O.D. x 0.8750in, so the gap between the guard and the fender is smaller, but not touching. I replaced the screws with a slightly bigger screw to solve this issue:
o SCREW, SHEET METAL, #10-16 X 1-1/2in, PAN HEAD, PHILLIPS, BLACK OXIDE
https://www.amazon.com/Stainless-Finish-Phillips-Thread-Length/dp/B00GI82EYS/ref=sr_1_2?dchild=1&keywords=Screws&pd_rd_r=99a2a98c-a9b2-47db-a8e0-bdc4a3c35dcd&pd_rd_w=7WHqO&pd_rd_wg=muJvu&pf_rd_p=91473338-a775-4a82-9600-6767cae1f29a&pf_rd_r=Y9WES3MMRJD6ZS07J6PK&pid=VyRJshz&qid=1598501736&refinements=p_n_feature_twenty-eight_browse-bin:19043685011,p_n_feature_fourteen_browse-bin:17910826011,p_n_feature_two_browse-bin:2292861011|2292869011|3119702011,p_n_feature_thirteen_browse-bin:15245615011|15245616011&s=industrial&sr=1-2
Hope this helps anyone that runs into this issue.
UPDATE: I contact ZL1 with this issue and suggestion and they sent me a mounting hardware kit for the rear rock guards to resolve the issue. They noted my suggestion on the screw size change.
I’ve come to find that the supplied hardware rusts quite rapidly. I’ll have to replace it.just installed these. The hardware they ship leaves much to be desired. Standoffs are too tall and the screws are too short to use those as is so I had to trim the standoffs down.
Not the end of the world but it would be nice if these we’re dialed in being as it being 6 screws, washers, and standoffs it shouldn’t be that hard to send the correct stuff.
That was my other thought. It’s just cheap hardware not made for weather. I’ll wait and see and not be surprised when I have to replace and upgrade it.I’ve come to find that the supplied hardware rusts quite rapidly. I’ll have to replace it.