AJRMKV
Well-Known Member
Popped a second hydraulic release bearing. Just got the stock slave back in so i'll attempt this week if possible.you have the setup I want so , looking for those 60-130 when you are bored.
Sponsored
Popped a second hydraulic release bearing. Just got the stock slave back in so i'll attempt this week if possible.you have the setup I want so , looking for those 60-130 when you are bored.
Was it another faulty unit or just couldn’t handle the power your throwing down?Popped a second hydraulic release bearing. Just got the stock slave back in so i'll attempt this week if possible.
Another faulty unit according to the shop that took it off. Going through another process with CM at the moment to have it warrantied.Was it another faulty unit or just couldn’t handle the power your throwing down?
Is CM paying for the labor?Another faulty unit according to the shop that took it off. Going through another process with CM at the moment to have it warrantied.
Hope they get it sorted out as it is an upgrade I was keeping my eye on.Another faulty unit according to the shop that took it off. Going through another process with CM at the moment to have it warrantied.
Nope, just partsIs CM paying for the labor?
Getting closer with E40, but how did you get any traction? let alone 3rd gear, 2nd gear!?I start in 2nd and the DA was around 600, temps in the 60s
I have 4 different sets of wheels/tires but on this pull i was on a set of 275 p zero tires ... when it gets cooler i have a separate set of wheels and 315 r888r tires and if i want to dig i have a drag pack with et street r tires.Getting closer with E40, but how did you get any traction? let alone 3rd gear, 2nd gear!?
I'm spinning in 3rd gear at 4000 rpm (50mph) so bad, 2nd gear is useless. What tires do you have?
Wow, I am running 295 Pilot SS and it doesn't hook. This is ECU tune with a lot of timing, so maybe I'm running way more torque. Is your downpipe catted?I have 4 different sets of wheels/tires but on this pull i was on a set of 275 p zero tires ... when it gets cooler i have a separate set of wheels and 315 r888r tires and if i want to dig i have a drag pack with et street r tires.
i have an rk tunes dp no cat , there are a lot of factors when it comes to traction ... i used to make over 600hp on my old m3 and i could hook a 60 no issues with a 295 street tire on it, the way the turbos power ramps in suspension, what mph you actually start from, temp of the tires and road, fuel in the tank ... a lot of other factors as wellWow, I am running 295 Pilot SS and it doesn't hook. This is ECU tune with a lot of timing, so maybe I'm running way more torque. Is your downpipe catted?
How’s this setup treating you so far? I might also do a DI upgrade while waiting for BM3 rev2 board. Would you make more power if you added a LPFP?remnant omega 65 turbo kit, Spool FX400X HPFP, S58 injectors, TBE, flex fuel kit, MHD+.
How’s this setup treating you so far? I might also do a DI upgrade while waiting for BM3 rev2 board. Would you make more power if you added a LPFP?