60-130 Manual

[djf]

Hey, does the new clutch still work properly with the revmatch? i heard some aftermarket clutches are too heavy

Works fine

Sponsored

 

[Pxtra]

I do get a little stumble when shifting easy from 1-2. Basically only when under 1/4 throttle and shift between 2800 and 3500rpm. Definitely doesn’t bother me and the only thing I’ve noticed between revmatch and it off. I’ve noticed if l push the clutch in and say hold it in for an extra .5 second it doesn’t do it. It is weird but not a big deal. Take rev match off everything is perfect.

did you order from CES Motorsports? the total cost i think with the cnc billet dmf is 3000.
saw this https://trucranemotorsports.com/pro...kit-for-b58-bmw-toyota?variant=51656735588668 for a good amount less but not sure on the quality.

 

[ntfrendlyGR]

I do get a little stumble when shifting easy from 1-2. Basically only when under 1/4 throttle and shift between 2800 and 3500rpm. Definitely doesn’t bother me and only thing I’ve noticed between rev match and it off. I’ve noticed it I l push the clutch in and say hold it for an extra .5 second it doesn’t do it. It is weird but not a big deal. Take rev match off everything is perfect.

Yes CES
DM, twin Sinster
Took 3 weeks I believe

 

[Erty]

Hey, does the new clutch still work properly with the revmatch? i heard some aftermarket clutches are too heavy

Yes rev matching works perfectly fine, no issues on my end. This clutch isn't heavy, actually feels like stock.

 

[Cfdproductions]

Turnt up a bit more … still gonna give it one more shot once I gap the plugs since I think I’m blowing out spark

 

[AJRMKV]

Turnt up a bit more … still gonna give it one more shot once I gap the plugs since I think I’m blowing out spark

Super impressive for stock turbo and getting very close to my big turbo pump gas time. 550whp but relatively conservative on torque.

 

[Cfdproductions]

Super impressive for stock turbo and getting very close to my big turbo pump gas time. 550whp but relatively conservative on torque.

What’s your setup

 

[AJRMKV]

What’s your setup

Remnant Omega 65 V1, FBO, FX400X HPFP, nostrum injectors, precision 2.5 lpfp, suspension, tire etc

 

[djf]

Low boost and first attempt with some brake boosting

 

[Cfdproductions]

Low boost and first attempt with some brake boosting

Nice it’s got plenty more in it!

 

[djf]

Little more E and better brake boosting

 

[BayeauxSupra]

Little more E and better brake boosting

Mods?

 

[AJRMKV]

Little more E and better brake boosting

Legendary DA! What's your tire setup and how much boost? I'm barely able to hook at 70 degrees at 60mph let alone 45 degrees

 

[djf]

Mods?

For power - pure 800, ptb twin disc, pi, lpfp, reflex

 

[djf]

Legendary DA! What's your tire setup and how much boost? I'm barely able to hook at 70 degrees at 60mph let alone 45 degrees

This is a flex map which I think tops out at 28lbs. Running 17” welds with a 305/45/17 MT street R on stock suspension

Sponsored