Front plate placement / Let's see those personalized License plates

[legacy_etu]

^^^ You realize your blocking the FMIC with that placement....
.....right?

Sponsored

 

[justbake]

^^^ You realize there is no FMIC....
.....right?

 

[legacy_etu]

^^^ You realize there is no FMIC....
.....right?

ha , are you sure? Laughing at myself here. I thought I read there was a FMIC ....ok, the radiator and tranny cooler then.

 

[BananaBandolero]

ha , are you sure? Laughing at myself here. I thought I read there was a FMIC ....ok, the radiator and tranny cooler then.

Ha it definitely costs some airflow, but not a ton of options without some sort of obstruction. Probably helps that the plate stands off the mesh a bit. I'd figure if you're doing anything properly strenuous you can pull it off anyway.

 

[E4EVL]

^^^ You realize your blocking the FMIC with that placement....
.....right?

I do indeed and the impact isn’t worth worrying about in the slightest, more than enough room for air to circulate. It’s like comparing two different front bumpers that have different designs and cutouts

 

[Zoopra]

Took 5 months, but finally. I need a “NiCe BmW” license plate frame to go with.

 

[mlevere1988]

Iowa State grads know...

 

[Waferz]

Swapped to this plate today!

 

[SupraYYJ]

Carbonio no-drill front license plate mount:

The mount is adjustable. Here it's set to its minimum extension and a slight backward tilt. The mount isn't a perfect fit for the Supra -- it includes a hook that's too shallow to fit over our grilles -- but I think it'll be okay.

 

[Ninjanino]

Hi to all,

I am new to this forum and have see that many discuss the position of the front number plate.
I could not work out why Toyota decided to drill four holes in the beautiful front bumper. So I asked for the plate to be left off when purchasing this Awesome car.

I ordered my legal plate from four dot who offered a great service.

This allowed me to look at various places to fix the front plate and ended up asking a good friend who made me the fixing that can be either drilled on or stuck with strong double sided tape which I have used. Where it is positioned it does not affect the air flow.

I hope this helps you if you are thinking to change the position of your plate.

Enjoy driving your cars!!!!!!

Hi

 

[AlRayes_BRN]

Thankfully where I live they issue stickers (a bit smaller than the number plate on the vehicle on the picture you posted) which easily fits on the bumper.

 

[dc2r]

You are all so lucky. Where I’m from a front plate is required by law, and stickers are not legal. Even offsetting the plate to a tow hook location is cause for contention with local law enforcement because the rules state it has to be centred and I think also at a certain minimal height from the ground... Sigh.

 

[justbake]

Hello, I currently have Brand New Seibon Carbon Fiber Door Garnishes & Mirror Caps for sale in the Bay Area and aslo can do free shipping, message me if interested!

Instead of spamming the forum, start a new thread

 

[H2O_Doc]

License Plate Bracket - Question on two Specific Examples

New owner in a front-plate-state:

I’ve narrowed my consideration to two makes of tow hook mounted brackets. Here are those two choices:

A) This bracket protrudes less and sits nearly flush in the driver side gap:

B) This option seems widely adopted, but protrudes a bit:

im worried that B might get snagged by someone walking between parked cars etc. I am therefore leaning towards A. Does that make sense? Am I missing important considerations? Any thoughts?

your thoughts appreciated.

 

[Suggs.OR]

I have option B and have had zero issue with it. I bent the bracket a little bit so it is more flush with the car. No issues with any sensors being blocked either.

Sponsored