3D Print Options for the Supra

[rwense]

Anyone got a guage pod file yet? Thanks in advance

Where are you looking to place one? I suppose I could model one

Sponsored

 

[rwense]

Preferably molded to the left/driver's window vent on the dash. They sell them for there and another that attaches to the screen in between that and the dash cluster. The screen one isn't ideal for me and I have a tough time justifying paying $60 for a 3d printed one or $20 for the file when I own 5 printers I don't use. I'm all for paying a fee, like $3, 5, MAYBE $10 for the file, but I think $20 is a bit much. Maybe I'm just being cheap??? I dunno, lol. I can't/don't model or blend, I barely print once a year, so I never learned to design. I have pics if it helps? I appreciate it if you can.

I could design one, albeit I need to work on a few designs for other people at the moment. Id probably charge $8-10 for the file. Keep in mind yeah the price o the file might be sorta high but there's typically a lot of time modelling, measuring, testing, re-testing, etc.

If you give me the exact dimensions of your gauge and such id happily design and print one for $50 + shipping.

Also, not trying to sound nagging but 3d printing is 50% printing and 50% design. Id really recommend playing with fusion 360 and blender. Both are free, both are powerful, and you can make a lot of cool stuff in relatively short time spans, i.e. my fender vents, my hood vent, headlight ducts, phone mounts, spats, my splitter tunnels, etc.

 

[i3igpete]

I'm all for paying a fee, like $3, 5, MAYBE $10 for the file, but I think $20 is a bit much. Maybe I'm just being cheap???

Honestly, I wouldn't model one from scratch if this already existed for $20. There's no way I would be able to get it done in 10-20 minutes, which is what a typical hourly rate for our day jobs...

 

[BeepBoop321]

I created a wireless charging tray that sits on top of the OEM one, so that your phone can actually charge your phone without it overheating. Post with more info: 3D Printed Charging Tray | SupraMKV - 2020+ Toyota Supra Forum (A90 MKV Generation)

.

 

[Vegas17]

Pretty bored and made this using the below model maker link. Wanted it more for torque and sizes then just went an followed the service manual steps too. Kinda cool online tool for whatever it is you need.

Model Maker Link

 

[Vegas17]

Posted this in another thread a while back but i'll add it here as well. Did an armrest insert and skinned it with carbon. Not perfect with the curve but well enough for me.

 

[dn00]

Cupholder insert for the 3rd wheel, or extra large water bottles

 

[Supradawg]

Posted this in another thread a while back but i'll add it here as well. Did an armrest insert and skinned it with carbon. Not perfect with the curve but well enough for me.

how much to make me one pls.

 

[BeepBoop321]

Cupholder insert for the 3rd wheel, or extra large water bottles

Could you provide me with a link to the STL?

 

[baagel]

@rwense Interested in the file for the jack stand adapters if you are able to find them. Thank you!

 

[puzzled]

If I had such engineering talent, I would make 4 trunk liner stoppers for my ModernSpare tire bag so that it does not slide oround in the trunk. I'm currently using four 90 degree organizer non-slip thingies, but if it followed the radius of the spare that would be so much more secure..

 

[Vegas17]

Been a little bored so I started mocking up and modeling a GT3 style aero blade that sits in my Rexspeed fenders. Printed using ASA on my X1C. Smooth and epoxy carbon wrapped. Carbon wrap work is subpar on this first one so i'll go to vacuum bagging my next set. Don't know if it'll do much but just seeing more if I can do it than anything.

 

[rwense]

Speaking of fender add-ons, I just had someone test fit and install the lower part of a 2 part vent kit to be installed in the fender.

The lower vent can actually work in thr OEM fender as well as the EVS fender and allows the wheel well to evacuate high-pressure air to aid in df, brake cooling, tire cooling, and increase throughput of the auxiliary rads.

Like my other parts, ill be listing them on my cults site for download. ?

https://cults3d.com/@rwense

 

[rwense]

@rwense Interested in the file for the jack stand adapters if you are able to find them. Thank you!

Sure thing! Shoot me a DM and ill send it your way.

 

[swrdply400mrelay]

Speaking of fender add-ons, I just had someone test fit and install the lower part of a 2 part vent kit to be installed in the fender.

The lower vent can actually work in thr OEM fender as well as the EVS fender and allows the wheel well to evacuate high-pressure air to aid in df, brake cooling, tire cooling, and increase throughput of the auxiliary rads.

Like my other parts, ill be listing them on my cults site for download. ?

https://cults3d.com/@rwense

Do you have a side profile pic with the entire car? Thanks!

Sponsored