XHP Reviews and Feedback!

[32bitsofGil]

i went with -15%

Ah so this confirms my earlier thoughts. M mode blips actually affect the car in other modes as well. I have had this around -5% but will dip it a bit lower. Shame cause it actually really pops in second when it does blip properly.

As for the other gears I have these blips cranked and most of them are comfrotable enough.

Sponsored

 

[Sereph102889]

When the guys at xHP are referring to certain tuning platforms and such having compatibility, does anyone know if MHD is working with xHP currently? This is possibly a stupid question....?

 

[Supra_Cop]

When the guys at xHP are referring to certain tuning platforms and such having compatibility, does anyone know if MHD is working with xHP currently? This is possibly a stupid question....?

It’s two separate systems. MHD flashing changes your ECU (engine control) while XHP changes your TCU (transmission control). There may however be tuners in the future that will be able to do custom maps for your ecu and tcu, to make them pair together more efficiently.

As far as them working together, the short answer is they do different things. Also, each one of them offer their own OTS maps.

 

[Sereph102889]

It’s two separate systems. MHD flashing changes your ECU (engine control) while XHP changes your TCU (transmission control). There may however be tuners in the future that will be able to do custom maps for your ecu and tcu, to make them pair together more efficiently.

As far as them working together, the short answer is they do different things. Also, each one of them offer their own OTS maps.

Well yea I knew all of that, but something that xHP said in their write up was a little concerning. It was something to the effect of "This is why for optimal performance you do want an engine tune that does not use "bent torque values." Something like that is why I was wondering if anyone knew what tuners did or didn't use this "Bent Torque Values". I will do some more reading into what exactly they said.

 

[dzeleski]

Well yea I knew all of that, but something that xHP said in their write up was a little concerning. It was something to the effect of "This is why for optimal performance you do want an engine tune that does not use "bent torque values." Something like that is why I was wondering if anyone knew what tuners did or didn't use this "Bent Torque Values". I will do some more reading into what exactly they said.

The ECU sends the current tq output to the transmission, the transmission uses that info to shift properly and can ask the ECU to reduce tq when needed.

Before the TCU tuning, tuners would modify the torque output tables to trick the TCU into doing things because we did not have the ability to tell the transmission to go above it’s set limits. Without the tricks the ECU/TCU would go into limp mode because limits were broken.

This is no longer required and if your tune does this you should have it fixed.

https://www.xhpflashtool.com/blog/line_pressure_vs_engine_torque/

 

[Rylicz]

Hi guys,

I’ve actually never posted here before so my words might not hold weight but I own a FBO A90 and a FBO F30. A lot of my experience is balanced between the track, canyons, and daily pushing BMW motors.

I have personal experience seeing xHP applied to an f30 with a b58 that was aggressively driven and used as a daily for years. What I can tell you is this:

• It is a mod that brought the car to life similar to what was experienced ecu tuning the b58.
• We had 0 transmission problems on the f30 and didn’t hear of any friends having much either.
• It endured a beating too - I’m talking high speed runs, canyon runs at high alt, driving it hard in reg city driving. The “reliable” upgraded hpfp gave problems before this did.

While this flash is seemingly new due to the recent release and variances in the zf trans that is offered in the BMW and Toyota applications, the guys at xHP have been reliably doing this for years. They could have rolled this out right away but took two years after the release of the car to do so.

I’m flashing my Supra this wknd and will let you know my immediate findings, but I’m pretty confident based on my experience and their track record so far.

Thought I could get around needing the Thor or orange mhd adapter (even though it was noted) so will have to wait until the specific adapter arrives. Sigh.

 

[SD_MK]

Well yea I knew all of that, but something that xHP said in their write up was a little concerning. It was something to the effect of "This is why for optimal performance you do want an engine tune that does not use "bent torque values." Something like that is why I was wondering if anyone knew what tuners did or didn't use this "Bent Torque Values". I will do some more reading into what exactly they said.

You should E-mail Fabian to see if he's doing any test/tuning of xHP along side his tunes.

 

[32bitsofGil]

Anyone experimenting with torque limits per gear?

 

[Nonschlont]

I just ordered the orange mhd adapter. Going to give this a shot. I'll report back with my impressions when it shows up..

 

[p0630034]

I was having the same issue on the 3-2 downshift, here’s what did the trick for me after contacting Xhp, btw they replied back really fast so their support people is doing their job!

i went with -15%

Thanks for this information. -15% on 3-2 blips solved the issues.

 

[Xannyy]

Not sure if this is a dumb question just never used any of these programs on a locked ecu before , I got a 21, currently using jb4, I see this uses ur ob port also does that mean you need like a splitter ? Or do you flash and then plug jb4 back in? Anyone using this in conjunction with the jb4 or is this going to be its replacement? Just new to these programs seeking thoughts not to familiar on this new stuff , thank you guys

 

[Supra_Cop]

Not sure if this is a dumb question just never used any of these programs on a locked ecu before , I got a 21, currently using jb4, I see this uses ur ob port also does that mean you need like a splitter ? Or do you flash and then plug jb4 back in? Anyone using this in conjunction with the jb4 or is this going to be its replacement? Just new to these programs seeking thoughts not to familiar on this new stuff , thank you guys

You’ll just unplug the JB4 and plug whatever dongle you choose to use that is compatible with XHP into the obd port to flash. After you’re done flashing, plug your JB4 back in. JB4 “tricks” the ECU (engine control unit), this flash is for the TCU (transmission control unit). They’re two different “brain boxes”.

 

[zrk]

You’ll just unplug the JB4 and plug whatever dongle you choose to use that is compatible with XHP into the obd port to flash. After you’re done flashing, plug your JB4 back in. JB4 “tricks” the ECU (engine control unit), this flash is for the TCU (transmission control unit). They’re two different “brain boxes”.

This is ~generally correct, but to add a little bit of clarification, the TCM flash is a flash. The modifies the firmware on the device, just like an ECU flash, or updating your iPhone software. When it's done it's done, and the dongle is no longer needed.

JB4 needs that OBD connection because it uses it to get data from the ECU so the piggyback can do its thing. It needs to be connected all the time.

Like @Supra_Cop said, once it's flash, toss the dongle in a tool box and you're done.

 

[stormgreysupra]

I've seen many people liking the M throttle blips feature that is on the Stage 3 map. Can anyone explain what it does exactly? Is it just more throttle applied during downshifts? What is the benefit of it?

 

[METAL]

Tested on my 2021 Supra. Looks like the 2021s don’t have yet the custom settings since their firmware is different than the 2020s so using ots stage 3 for now. The shifts in sport mode are way faster and and crisper, did notice a bit difference (faster)in comfort. The only con is that the downshift from 3-2 in sport mode the car surges forward as if the rev match isn’t correctly matched to the speed of the car. Hopefully Xhp will fix that in the next update. My car has 602 so the accelerated wear was there already so ??‍. And yes it will work with the mhd Orange adapter.

Didn't know even the tranny's had different firmwares between the years.

Sponsored