The what now? Are you talking about DWP, if you are talking about DWP, this isn't going to affect your times at all, it's more of a parameter to adjust the daily driving 'feel.'Throttle response table set to 70
To those running MAP 2, what kind of AFRs are you seeing under full throttle?
Not really sure why I included that number, I was tired lol I think i was going a different route with my post and changed my mind.The what now? Are you talking about DWP, if you are talking about DWP, this isn't going to affect your times at all, it's more of a parameter to adjust the daily driving 'feel.'
Also - keep a close eye on your logs if you're running Map 3. Map 3 is an additive map that pushes 6psi over whatever the DME is requesting. It's incredibly easy, especially with a DA like that, for your DME to be requesting 16-17psi. Toss 6psi on that, and you'll go lean and max out trims. Especially if you're running E.
Also consistently trapping almost 125mph on the street. Of course the ETs are trash since I am on stock tires and backroads in 40deg weather
It only takes the one where you go lean.Hundreds of pulls!
Thanks for the info. Just making sure what I was seeing was right. I know I have no option to change what the ecu commands afr to be, so that sucks. Hurry up people and get these things tunable!14.3 - 14.5 in the lower gears (which is a mindfuk for those of us accustomed to PI tuning) and then it tends to fatten up to mid/high 12's up top once IAT's exceed 110°.
This was from last night ?? A tiny bit slower but there is some variability off the hit. The 100-130 times are essentially identical so it’s not losing any power between the DAs you see here125 is ?? but that DA!
Any results with the same mods in positive DA?
I really recommend talking to @Jesse DaBears for a custom map 6. It's a night and day difference compared to the presets.Bumping an old thread because I know things change and I don't want to clutter the site with redundant threads:
** 2021 with a HFC DP running 25-30% e-85. Looks like MAP4 may be the best one to use?
** when running 100% 91 oct = MAP2?